Contact Us 1-800-596-4880
  1. Homepage
  2. Database Connector (1.10)

  3. Database Connector Reference

All Connectors

Database Connector Reference 1.10 - Mule 4

Anypoint Connector for Database (Database Connector) enables you to connect to relational databases through the JDBC API.

Release Notes: Database Connector Release Notes

Configurations

Default Configuration

Use these parameters to configure the default configuration.

Parameters

Name Type Description Default Value Required

Name

String

The name for this configuration. Connectors reference the configuration with this name.

x

Connection

The connection types to provide to this configuration.

x

Expiration Policy

Expiration Policy

Configures the minimum amount of time that a dynamic configuration instance can remain idle before Mule considers it eligible for expiration. This does not mean that the platform expires the instance at the exact moment that it becomes eligible. Mule purges the instances as appropriate.

Connection Types

Data Source Reference Connection

Configure the connection provider implementation that creates database connections from a referenced data source.

When you use a provider’s custom type in a Data Source Reference Connection, define the type inside the Column Types form of the Advanced section in the Database config.
As an example, for Oracle DB checkout their Constant Field Values page (section oracle.jdbc.OracleTypes) for the correct id/type name combination.

Parameters
Name Type Description Default Value Required

Pooling Profile

Pooling Profile

Provides a way to configure database connection pooling

Column Types

Array of Column Type

Specifies non-standard column types

Data Source Ref

Any

Reference to a JDBC DataSource object. This object is typically created using Spring. When using XA transactions, an XADataSource object must be provided.

x

Reconnection

Reconnection

When the application is deployed, a connectivity test is performed on all connectors. If set to true, deployment fails if the test doesn’t pass after exhausting the associated reconnection strategy.
Derby Connection

Use these parameters to create connections to a Derby database.

Parameters
Name Type Description Default Value Required

Pooling Profile

Pooling Profile

Provides a way to configure database connection pooling

Column Types

Array of Column Type

Specifies non-standard column types

Transaction Isolation

Enumeration, one of:

  • NONE

  • READ_COMMITTED

  • READ_UNCOMMITTED

  • REPEATABLE_READ

  • SERIALIZABLE

  • NOT_CONFIGURED

The transaction isolation level to set on the driver when connecting the database

NOT_CONFIGURED

Use XA Transactions

Boolean

Indicates whether or not the created data source must support XA transactions

false

Database

String

Name of the database

Subsub Protocol

String

Specifies where Derby should look for the database. The available options are:

  • directory

  • memory

  • classpath

  • jar

directory

Create

Boolean

Indicates whether to create the database if it does not already exist

false

Connection Properties

Object

Specifies a list of custom key-value connection properties for the configuration

Reconnection

Reconnection

When the application is deployed, a connectivity test is performed on all connectors. If set to true, deployment fails if the test doesn’t pass after exhausting the associated reconnection strategy.
Generic Connection

Configure these parameters for the connection provider that creates connections for any kind of database using a JDBC URL and the required JDBC driver class.

When you use a provider’s custom type in a Generic Connection, define the type inside the Column Types form of the Advanced section in the Database config.
As an example, for Oracle DB checkout their Constant Field Values page (section oracle.jdbc.OracleTypes) for the correct id/type name combination.

Parameters
Name Type Description Default Value Required

Pooling Profile

Pooling Profile

Provides a way to configure database connection pooling

Column Types

Array of Column Type

Specifies non-standard column types

Transaction Isolation

Enumeration, one of:

  • NONE

  • READ_COMMITTED

  • READ_UNCOMMITTED

  • REPEATABLE_READ

  • SERIALIZABLE

  • NOT_CONFIGURED

The transaction isolation level to set on the driver when connecting the database

NOT_CONFIGURED

Use XA Transactions

Boolean

Indicates whether or not the created datasource must support XA transactions

false

URL

String

JDBC URL to use to connect to the database

x

Driver Class Name

String

Fully-qualified name of the database driver class

x

User

String

Database username

Password

String

Database password

Reconnection

Reconnection

When the application is deployed, a connectivity test is performed on all connectors. If set to true, deployment fails if the test doesn’t pass after exhausting the associated reconnection strategy.
Microsoft SQL Server Connection

Configure these parameters for the database connection provider implementation for Microsoft SQL Server databases.

Parameters
Name Type Description Default Value Required

Pooling Profile

Pooling Profile

Provides a way to configure database connection pooling

Column Types

Array of Column Type

Specifies non-standard column types

Transaction Isolation

Enumeration, one of:

  • NONE

  • READ_COMMITTED

  • READ_UNCOMMITTED

  • REPEATABLE_READ

  • SERIALIZABLE

  • NOT_CONFIGURED

The transaction isolation level to set on the driver when connecting the database

NOT_CONFIGURED

Use XA Transactions

Boolean

Indicates whether or not the created datasource must support XA transactions

false

Host

String

Configures the host of the database

x

Instance Name

String

Configures the name of the SQL server instance where the database is located

Port

Number

Configures the port of the database

User

String

The user to use for authentication against the database

Password

String

The password to use for authentication against the database

Database Name

String

Name of the default database to work with

Connection Properties

Object

Specifies a list of custom key-value connection properties for the configuration

Reconnection

Reconnection

When the application is deployed, a connectivity test is performed on all connectors. If set to true, deployment fails if the test doesn’t pass after exhausting the associated reconnection strategy.
MySQL Connection

Configure these parameters to connect to a MySQL database.

Parameters
Name Type Description Default Value Required

Pooling Profile

Pooling Profile

Provides a way to configure database connection pooling

Column Types

Array of Column Type

Specifies non-standard column types

Transaction Isolation

Enumeration, one of:

  • NONE

  • READ_COMMITTED

  • READ_UNCOMMITTED

  • REPEATABLE_READ

  • SERIALIZABLE

  • NOT_CONFIGURED

The transaction isolation level to set on the driver when connecting the database

NOT_CONFIGURED

Use XA Transactions

Boolean

Indicates whether or not the created datasource must support XA transactions

false

Host

String

Configures the host of the database

x

Port

Number

Configures the port of the database

x

User

String

The user to use for authentication against the database

Password

String

The password to use for authentication against the database

Database

String

The name of the database

Connection Properties

Object

Specifies a list of custom key-value connectionProperties for the configuration

Reconnection

Reconnection

When the application is deployed, a connectivity test is performed on all connectors. If set to true, deployment fails if the test doesn’t pass after exhausting the associated reconnection strategy.
Oracle Connection

Configure these parameters to create connections to an Oracle database.

Parameters
Name Type Description Default Value Required

Pooling Profile

Pooling Profile

Provides a way to configure database connection pooling

Column Types

Array of Column Type

Specifies non-standard column types

Transaction Isolation

Enumeration, one of:

  • NONE

  • READ_COMMITTED

  • READ_UNCOMMITTED

  • REPEATABLE_READ

  • SERIALIZABLE

  • NOT_CONFIGURED

The transaction isolation level to set on the driver when connecting to the database

NOT_CONFIGURED

Use XA Transactions

Boolean

Indicates whether or not the created datasource must support XA transactions

false

Host

String

Configures the host of the database

x

Port

Number

Configures the port of the database

1521

User

String

The user to use for authentication against the database

Password

String

The password to use for authentication against the database

Instance

String

The name of the database instance

Service Name

String

The name of the database service name

Reconnection

Reconnection

When the application is deployed, a connectivity test is performed on all connectors. If set to true, deployment fails if the test doesn’t pass after exhausting the associated reconnection strategy.

Operations

Associated Sources

Bulk Delete

<db:bulk-delete>

This operation allows delete operations to execute at various times using different parameter bindings and a single database statement. This improves performance compared to executing a single delete operation at various times.

Parameters

Name Type Description Default Value Required

Configuration

String

The name of the configuration to use

x

Input Parameters

Array of Object

Specifies a list of maps, which contain the parameter names as keys and the value the parameter is bound to, and in which every list item represents a row to insert.

#[payload]

Transactional Action

Enumeration, one of:

  • ALWAYS_JOIN

  • JOIN_IF_POSSIBLE

  • NOT_SUPPORTED

The type of joining action that operations can take regarding transactions

JOIN_IF_POSSIBLE

Query Timeout

Number

Indicates the minimum amount of time before the JDBC driver attempts to cancel a running statement. By default, no timeout is used.

0

Query Timeout Unit

Enumeration, one of:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

A time unit that qualifies the #queryTimeout. Values specified in nanoseconds, microseconds, or milliseconds are rounded to seconds.

SECONDS

Fetch Size

Number

Indicates how many rows to fetch from the database when rows are read from a ResultSet. This property is required when streaming is true, in which case a default value of 10 is used.

Max Rows

Number

Sets the limit for the maximum number of rows that any ResultSet object generated by this message processor can contain for the given number. If the limit is exceeded, the excess rows are silently dropped.

SQL Query Text

String

The text of the SQL query to execute

x

Parameter Types

Array of Parameter Type

This parameter allows you to optionally specify the type of one or more of the parameters in the query. If a value is provided, you’re not required to reference all of the parameters; but you cannot reference a parameter that is not present in the input values.

Target Variable

String

The name of a variable to store the operation’s output

Target Value

String

An expression to evaluate against the operation’s output and store the expression outcome in the target variable

#[payload]

Reconnection Strategy

A retry strategy in case of connectivity errors

Output

Type

Array of Number

For Configurations

Throws

  • DB:CONNECTIVITY

  • DB:QUERY_EXECUTION

  • DB:RETRY_EXHAUSTED

  • DB:BAD_SQL_SYNTAX

Bulk Insert

<db:bulk-insert>

This operation allows inserts to execute at various times using different parameter bindings and a single database statement. This improves performance compared to executing a single insert operation at various times.

Parameters

Name Type Description Default Value Required

Configuration

String

The name of the configuration to use

x

Input Parameters

Array of Object

A list of maps in which every list item represents a row to be inserted, and the map contains the parameter names as keys and the value the parameter is bound to.

#[payload]

Transactional Action

Enumeration, one of:

  • ALWAYS_JOIN

  • JOIN_IF_POSSIBLE

  • NOT_SUPPORTED

The type of joining action that operations can take regarding transactions.

JOIN_IF_POSSIBLE

Query Timeout

Number

Indicates the minimum amount of time before the JDBC driver attempts to cancel a running statement. No timeout is used by default.

0

Query Timeout Unit

Enumeration, one of:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

A TimeUnit that qualifies the #queryTimeout. Values specified in nanoseconds, microseconds, or milliseconds are rounded to seconds.

SECONDS

Fetch Size

Number

Indicates how many rows to fetch from the database when rows are read from a resultSet. This property is required when streaming is true; in that case a default value (10) is used.

Max Rows

Number

Sets the limit for the maximum number of rows that any ResultSet object generated by this message processor can contain for the given number. If the limit is exceeded, the excess rows are silently dropped.

SQL Query Text

String

The text of the SQL query to execute

x

Parameter Types

Array of Parameter Type

Allows you to optionally specify the type of one or more of the parameters in the query. If provided, you’re not required to reference all of the parameters, but you cannot reference a parameter not present in the input values

Target Variable

String

The name of a variable to store the operation’s output.

Target Value

String

An expression to evaluate against the operation’s output and store the expression outcome in the target variable

#[payload]

Reconnection Strategy

A retry strategy in case of connectivity errors.

Output

Type

Array of Number

For Configurations

Throws

  • DB:CONNECTIVITY

  • DB:QUERY_EXECUTION

  • DB:RETRY_EXHAUSTED

  • DB:BAD_SQL_SYNTAX

Bulk Update

<db:bulk-update>

This operation allows updates to execute at various times using different parameter bindings and a single database statement. This improves performance compared to executing one single update operation at various times.

Parameters

Name Type Description Default Value Required

Configuration

String

The name of the configuration to use

x

Input Parameters

Array of Object

Specifies a list of maps, which contain the parameter names as keys and the value the parameter is bound to, and in which every list item represents a row to insert.

#[payload]

Transactional Action

Enumeration, one of:

  • ALWAYS_JOIN

  • JOIN_IF_POSSIBLE

  • NOT_SUPPORTED

The type of joining action that operations can take regarding transactions.

JOIN_IF_POSSIBLE

Query Timeout

Number

Indicates the minimum amount of time before the JDBC driver attempts to cancel a running statement. By default, no timeout is used.

0

Query Timeout Unit

Enumeration, one of:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

A time unit that qualifies the #queryTimeout. Values specified in nanoseconds, microseconds, or milliseconds are rounded to seconds.

SECONDS

Fetch Size

Number

Indicates how many rows to fetch from the database when rows are read from a ResultSet.

10

Max Rows

Number

Sets the limit for the maximum number of rows that any ResultSet object generated by this message processor can contain for the given number. If the limit is exceeded, the excess rows are silently dropped.

SQL Query Text

String

The text of the SQL query to execute

x

Parameter Types

Array of Parameter Type

Allows you to optionally specify the type of one or more of the parameters in the query. If provided, you’re not required to reference all of the parameters; but you cannot reference a parameter that is not present in the input values.

Target Variable

String

The name of a variable to store the operation’s output

Target Value

String

An expression to evaluate against the operation’s output and store the expression outcome in the target variable

#[payload]

Reconnection Strategy

A retry strategy in case of connectivity errors

Output

Type

Array of Number

For Configurations

Throws

  • DB:CONNECTIVITY

  • DB:QUERY_EXECUTION

  • DB:RETRY_EXHAUSTED

  • DB:BAD_SQL_SYNTAX

Delete

<db:delete>

This operation deletes data in a database.

Parameters

Name Type Description Default Value Required

Configuration

String

The name of the configuration to use

x

Transactional Action

Enumeration, one of:

  • ALWAYS_JOIN

  • JOIN_IF_POSSIBLE

  • NOT_SUPPORTED

The type of joining action that operations can take regarding transactions

JOIN_IF_POSSIBLE

Query Timeout

Number

Indicates the minimum amount of time before the JDBC driver attempts to cancel a running statement. By default, no timeout is used.

0

Query Timeout Unit

Enumeration, one of:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

A time unit that qualifies the #queryTimeout. Values specified in nanoseconds, microseconds, or milliseconds are rounded to seconds.

SECONDS

Fetch Size

Number

Indicates how many rows to fetch from the database when rows are read from a ResultSet.

10

Max Rows

Number

Sets the limit for the maximum number of rows that any ResultSet object generated by this message processor can contain for the given number. If the limit is exceeded, the excess rows are silently dropped.

SQL Query Text

String

The text of the SQL query to execute

x

Parameter Types

Array of Parameter Type

Allows you to optionally specify the type of one or more of the parameters in the query. If a value is provided, you’re not required to reference all of the parameters; but you cannot reference a parameter that is not present in the input values.

Input Parameters

Object

A map in which keys are the name of an input parameter to set on the JDBC prepared statement. Each parameter should be referenced in the SQL text using a colon prefix (for example, where id = :myParamName). The map’s values contain the actual assignation for each parameter.

Target Variable

String

The name of a variable to store the operation’s output

Target Value

String

An expression to evaluate against the operation’s output and store the expression outcome in the target variable

#[payload]

Reconnection Strategy

A retry strategy in case of connectivity errors

Output

Type

Number

For Configurations

Throws

  • DB:CONNECTIVITY

  • DB:QUERY_EXECUTION

  • DB:RETRY_EXHAUSTED

  • DB:BAD_SQL_SYNTAX

Execute DDL

<db:execute-ddl>

This operation allows execution of DDL queries against a database.

Parameters

Name Type Description Default Value Required

Configuration

String

The name of the configuration to use

x

SQL Query Text

String

The text of the SQL query to execute

x

Transactional Action

Enumeration, one of:

  • ALWAYS_JOIN

  • JOIN_IF_POSSIBLE

  • NOT_SUPPORTED

The type of joining action that operations can take regarding transactions

JOIN_IF_POSSIBLE

Query Timeout

Number

Indicates the minimum amount of time before the JDBC driver attempts to cancel a running statement. By default, no timeout is used.

0

Query Timeout Unit

Enumeration, one of:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

A time unit that qualifies the #queryTimeout. Values specified in nanoseconds, microseconds, or milliseconds are rounded to seconds.

SECONDS

Fetch Size

Number

Indicates how many rows to fetch from the database when rows are read from a ResultSet.

10

Max Rows

Number

Sets the limit for the maximum number of rows that any ResultSet object generated by this message processor can contain for the given number. If the limit is exceeded, the excess rows are silently dropped.

Target Variable

String

The name of a variable to store the operation’s output

Target Value

String

An expression to evaluate against the operation’s output and store the expression outcome in the target variable

#[payload]

Reconnection Strategy

A retry strategy in case of connectivity errors

Output

Type

Number

For Configurations

Throws

  • DB:CONNECTIVITY

  • DB:QUERY_EXECUTION

  • DB:RETRY_EXHAUSTED

  • DB:BAD_SQL_SYNTAX

Execute Script

<db:execute-script>

This operation executes an SQL script in a single database statement. The script is executed as provided by the user, without any parameter binding.

Parameters

Name Type Description Default Value Required

Configuration

String

The name of the configuration to use

x

Transactional Action

Enumeration, one of:

  • ALWAYS_JOIN

  • JOIN_IF_POSSIBLE

  • NOT_SUPPORTED

The type of joining action that operations can take for transactions.

JOIN_IF_POSSIBLE

SQL Query Text

String

The text of the SQL query to execute

Script Path

String

Specifies the location of a file to load. The file can point to a resource on the classpath, or on a disk.

Query Timeout

Number

Indicates the minimum amount of time before the JDBC driver attempts to cancel a running statement. By default, no timeout is used.

0

Query Timeout Unit

Enumeration, one of:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

A time unit that qualifies the #queryTimeout. Values specified in nanoseconds, microseconds, or milliseconds are rounded to seconds.

SECONDS

Fetch Size

Number

Indicates how many rows to fetch from the database when rows are read from a ResultSet.

10

Max Rows

Number

Sets the limit for the maximum number of rows that any ResultSet object generated by this message processor can contain for the given number. If the limit is exceeded, the excess rows are silently dropped.

Target Variable

String

The name of a variable to store the operation’s output

Target Value

String

An expression to evaluate against the operation’s output and store the expression outcome in the target variable

#[payload]

Reconnection Strategy

A retry strategy in case of connectivity errors

Output

Type

Array of Number

For Configurations

Throws

  • DB:CONNECTIVITY

  • DB:QUERY_EXECUTION

  • DB:RETRY_EXHAUSTED

  • DB:BAD_SQL_SYNTAX

Insert

<db:insert>

This operation inserts data into a database.

Parameters

Name Type Description Default Value Required

Configuration

String

The name of the configuration to use

x

Transactional Action

Enumeration, one of:

  • ALWAYS_JOIN

  • JOIN_IF_POSSIBLE

  • NOT_SUPPORTED

The type of joining action that operations can take regarding transactions

JOIN_IF_POSSIBLE

Query Timeout

Number

Indicates the minimum amount of time before the JDBC driver attempts to cancel a running statement. By default, no timeout is used.

0

Query Timeout Unit

Enumeration, one of:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

A time unit that qualifies the #queryTimeout. Values specified in nanoseconds, microseconds, or milliseconds are rounded to seconds.

SECONDS

Fetch Size

Number

Indicates how many rows to fetch from the database when rows are read from a ResultSet.

10

Max Rows

Number

Sets the limit for the maximum number of rows that any ResultSet object generated by this message processor can contain for the given number. If the limit is exceeded, the excess rows are silently dropped.

SQL Query Text

String

The text of the SQL query to execute

x

Parameter Types

Array of Parameter Type

Allows you to optionally specify the type of one or more of the parameters in the query. If provided, you’re not required to reference all of the parameters; but you cannot reference a parameter that is not present in the input values.

Input Parameters

Object

A map in which keys are the name of an input parameter to be set on the JDBC prepared statement. Each parameter should be referenced in the SQL text using a colon prefix (E.g: where id = :myParamName)). The map’s values contain the actual assignation for each parameter.

Auto Generate Keys

Boolean

Indicates when to make auto-generated keys available for retrieval.

false

Auto Generated Keys Column Indexes

Array of Number

List of column indexes that indicates which auto-generated keys to make available for retrieval

Auto Generated Keys Column Names

Array of String

List of column names that indicates which auto-generated keys to make available for retrieval

Target Variable

String

The name of a variable to store the operation’s output

Target Value

String

An expression to evaluate against the operation’s output and store the expression outcome in the target variable

#[payload]

Reconnection Strategy

A retry strategy in case of connectivity errors

Output

Type

Statement Result

For Configurations

Throws

  • DB:CONNECTIVITY

  • DB:QUERY_EXECUTION

  • DB:RETRY_EXHAUSTED

  • DB:BAD_SQL_SYNTAX

Select

<db:select>

This operation queries data from a database. To prevent loading all the results at once, which can lead to performance and memory issues, results are automatically streamed. This means that pages of fetchSize rows are loaded when needed. If this operation is performed inside a transaction (that is, within a Try scope component) and that transaction is closed before consuming the data, accessing the results that haven’t been loaded will fail.

Some drivers, however, load the entire result upon query execution, which means streaming does not work. For example, sometimes Postgres drivers load the entire result into memory.

Parameters

Name Type Description Default Value Required

Configuration

String

The name of the configuration to use

x

Transactional Action

Enumeration, one of:

  • ALWAYS_JOIN

  • JOIN_IF_POSSIBLE

  • NOT_SUPPORTED

The type of joining action that operations can take regarding transactions

JOIN_IF_POSSIBLE

Streaming Strategy

Configure to use repeatable streams

Query Timeout

Number

Indicates the minimum amount of time before the JDBC driver attempts to cancel a running statement. By default, no timeout is used.

0

Query Timeout Unit

Enumeration, one of:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

A time unit that qualifies the #queryTimeout. Values specified in nanoseconds, microseconds, or milliseconds are rounded to seconds.

SECONDS

Fetch Size

Number

Indicates how many rows to fetch from the database when rows are read from a ResultSet.

10

Max Rows

Number

Sets the limit for the maximum number of rows that any ResultSet object generated by this message processor can contain for the given number. If the limit is exceeded, the excess rows are silently dropped.

SQL Query Text

String

The text of the SQL query to execute

x

Parameter Types

Array of Parameter Type

Allows you to optionally specify the type of one or more of the parameters in the query. If provided, you’re not required to reference all of the parameters; but you cannot reference a parameter that is not present in the input values.

Input Parameters

Object

A map in which keys are the name of an input parameter to be set on the JDBC prepared statement. Each parameter should be referenced in the SQL text using a colon prefix (for example: where id = :myParamName)). The map’s values will contain the actual assignation for each parameter.

Target Variable

String

The name of a variable to store the operation’s output.

Target Value

String

An expression to evaluate against the operation’s output and store the expression outcome in the target variable

#[payload]

Reconnection Strategy

A retry strategy in case of connectivity errors.

Output

Type

Array of Object

For Configurations

Working with Pooling Profiles

When working with pooling profiles and the Select operation, the connection remains open until one of the following occurs:

  • The flow execution ends

  • The content of the streams are consumed completely

  • The connection is the transaction key.

Because LOBs are treated as streams, the connection remains open until the flow execution ends, or until the content is consumed before the flow completes, in which case the best approach is taken to close the related connection.

This behavior occurs because the result set the operation generates can have a stream or be part of an ongoing transaction.

Throws

  • DB:BAD_SQL_SYNTAX

  • DB:CONNECTIVITY

  • DB:QUERY_EXECUTION

Query Single

<db:query-single>

This operation selects a single data record from a database. If you provide an SQL query that returns more than one row, then only the first record is processed and returned. This operation does not use streaming, which means that immediately after performing the Query Single operation, the complete content of the selected record is loaded into memory.

Parameters

Name Type Description Default Value Required

Configuration

String

The name of the configuration to use

x

Transactional Action

Enumeration, one of:

  • ALWAYS_JOIN

  • JOIN_IF_POSSIBLE

  • NOT_SUPPORTED

The type of join action that operations can take regarding transactions

JOIN_IF_POSSIBLE

Streaming Strategy

Configure to use repeatable streams

Query Timeout

Number

Indicates the minimum amount of time before the JDBC driver attempts to cancel a running statement. By default, no timeout is used.

0

Query Timeout Unit

Enumeration, one of:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

A time unit that qualifies the #queryTimeout. Values specified in nanoseconds, microseconds, or milliseconds are rounded to seconds.

SECONDS

Fetch Size

Number

Indicates how many rows to fetch from the database when rows are read from a ResultSet.

10

Max Rows

Number

The maximum number of rows that any ResultSet object generated by this message processor can contain. If the limit is exceeded, the excess rows are silently dropped.

SQL Query Text

String

The text of the SQL query to execute

x

Parameter Types

Array of Parameter Type

Enables you to optionally specify the type of one or more of the parameters in the query. If provided, you’re not required to reference all of the parameters; but you cannot reference a parameter that is not present in the input values.

Input Parameters

Object

A map in which keys are the name of an input parameter to be set on the JDBC prepared statement. Each parameter should be referenced in the SQL text using a colon prefix (for example: where id = :myParamName)). The map’s values will contain the actual assignation for each parameter.

Target Variable

String

Name of the variable in which to store the operation’s output

Target Value

String

Expression that evaluates the operation’s output. The expression outcome is stored in the target variable.

#[payload]

Reconnection Strategy

A retry strategy in case of connectivity errors.

Output

Type

Object

For Configurations

Working with Pooling Profiles

When working with pooling profiles and the Query Single operation, the connection returns to the pool immediately after the operation is performed.

Throws

  • DB:BAD_SQL_SYNTAX

  • DB:CONNECTIVITY

  • DB:QUERY_EXECUTION

Stored Procedure

<db:stored-procedure>

Invokes a stored procedure on the database. When the stored procedure returns one or more ResultSet instances, results are not read all at once. Instead, results are automatically streamed to prevent performance and memory issues. This behavior means that pages of fetchSize rows are loaded lazily when needed. If the Stored procedure operation is performed inside a transaction (for example, in a Try scope component), and that transaction is closed before consuming the data, accessing the results that haven’t been loaded will fail.

Parameters

Name Type Description Default Value Required

Configuration

String

The name of the configuration to use.

x

Transactional Action

Enumeration, one of:

  • ALWAYS_JOIN

  • JOIN_IF_POSSIBLE

  • NOT_SUPPORTED

The type of joining action that operations can take regarding transactions.

JOIN_IF_POSSIBLE

Streaming Strategy

Configure to use repeatable streams

Query Timeout

Number

Indicates the minimum amount of time before the JDBC driver attempts to cancel a running statement. No timeout is used by default.

0

Query Timeout Unit

Enumeration, one of:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

A time unit that qualifies the #queryTimeout. Values specified in nanoseconds, microseconds, or milliseconds are rounded to seconds.

SECONDS

Fetch Size

Number

Indicates how many rows to fetch from the database when rows are read from a resultSet. This property is required when streaming is true; in that case a default value (10) is used.

Max Rows

Number

Sets the limit for the maximum number of rows that any ResultSet object generated by this message processor can contain for the given number. If the limit is exceeded, the excess rows are silently dropped.

SQL Query Text

String

The text of the SQL query to execute

x

Parameter Types

Array of Parameter Type

Allows to optionally specify the type of one or more of the parameters in the query. If provided, you’re not even required to reference all of the parameters, but you cannot reference a parameter not present in the input values

Input Parameters

Object

A map in which keys are the name of an input parameter to be set on the JDBC prepared statement. Each parameter should be referenced in the SQL text using a colon prefix (for example: where id = :myParamName)). The map’s values will contain the actual assignation for each parameter.

Input - Output Parameters

Object

A map in which keys are the name of a parameter to be set on the JDBC prepared statement which is both input and output. Each parameter should be referenced in the SQL text using a colon prefix (for example: where id = :myParamName)). The map’s values will contain the actual assignation for each parameter.

Output Parameters

Array of Output Parameter

A list of output parameters to be set on the JDBC prepared statement. Each parameter should be referenced in the SQL text using a colon prefix (for example: call multiply(:value, :result))

Auto Generate Keys

Boolean

Indicates when to make auto-generated keys available for retrieval.

false

Auto Generated Keys Column Indexes

Array of Number

List of column indexes that indicates which auto-generated keys to make available for retrieval.

Auto Generated Keys Column Names

Array of String

List of column names that indicates which auto-generated keys should be made available for retrieval.

Target Variable

String

The name of a variable to store the operation’s output.

Target Value

String

An expression to evaluate against the operation’s output and store the expression outcome in the target variable

#[payload]

Reconnection Strategy

A retry strategy in case of connectivity errors

Output

Type

Object

For Configurations

Working with Pooling Profiles

When working with pooling profiles and the Stored procedure operation, the connection remains open until the flow execution ends or the content of the streams are consumed completely, or if the connection is the transaction key. This behavior occurs because the resultset the operation generates can have a stream or be part of an ongoing transaction.

Starting with Database Connector 1.8.3, the connections on the Stored procedure operation are released if they are not part of a stream or transaction.

Throws

  • DB:BAD_SQL_SYNTAX

  • DB:CONNECTIVITY

  • DB:QUERY_EXECUTION

  • DB:RETRY_EXHAUSTED

Update

<db:update>

Updates data in a database.

Parameters

Name Type Description Default Value Required

Configuration

String

The name of the configuration to use

x

Transactional Action

Enumeration, one of:

  • ALWAYS_JOIN

  • JOIN_IF_POSSIBLE

  • NOT_SUPPORTED

The type of joining action that operations can take for transactions

JOIN_IF_POSSIBLE

Query Timeout

Number

Indicates the minimum amount of time before the JDBC driver attempts to cancel a running statement. By default, no timeout is used.

0

Query Timeout Unit

Enumeration, one of:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

A time unit that qualifies the #queryTimeout. Values specified in nanoseconds, microseconds, or milliseconds are rounded to seconds.

SECONDS

Fetch Size

Number

Indicates how many rows to fetch from the database when rows are read from a ResultSet.

10

Max Rows

Number

Sets the limit for the maximum number of rows that any ResultSet object generated by this message processor can contain for the given number. If the limit is exceeded, the excess rows are silently dropped.

SQL Query Text

String

The text of the SQL query to execute

x

Parameter Types

Array of Parameter Type

Allows you to optionally specify the type of one or more of the parameters in the query. If provided, you’re not required to reference all of the parameters; but you cannot reference a parameter that is not present in the input values.

Input Parameters

Object

A map in which keys are the name of an input parameter to set on the JDBC prepared statement. Each parameter should be referenced in the SQL text using a colon prefix (for example: where id = :myParamName)). The map’s values contain the actual assignation for each parameter.

Auto Generate Keys

Boolean

Indicates when to make auto-generated keys available for retrieval

false

Auto Generated Keys Column Indexes

Array of Number

List of column indexes that indicates which auto-generated keys to make available for retrieval

Auto Generated Keys Column Names

Array of String

List of column names that indicates which auto-generated keys should be made available for retrieval

Target Variable

String

The name of a variable to store the operation’s output

Target Value

String

An expression to evaluate against the operation’s output and store the expression outcome in the target variable

#[payload]

Reconnection Strategy

A retry strategy in case of connectivity errors

Output

Type

Statement Result

For Configurations

Throws

  • DB:BAD_SQL_SYNTAX

  • DB:CONNECTIVITY

  • DB:QUERY_EXECUTION

  • DB:RETRY_EXHAUSTED

Sources

On Table Row

<db:listener>

This operation selects from a table at a regular interval and generates one message per obtained row. Optionally, you can provide watermark and ID columns. If a watermark column is provided, the values taken from that column are used to filter the contents of the next poll, so that only rows with a greater watermark value are returned. If an ID column is provided, this component automatically verifies that the same row is not picked twice by concurrent polls.

This operation does not support streaming, meaning that there is no need to perform additional transformations to the payload in order to access the operation results. This behavior is identical to the Query Single operation released in version 1.9.

Parameters

Name Type Description Default Value Required

Configuration

String

The name of the configuration to use

x

Table

String

The name of the table to select from

x

Watermark Column

String

The name of the column to use for a watermark. Values taken from this column are used to filter the contents of the next poll, so that only rows with a greater watermark value are processed.

Id Column

String

The name of the column to consider as the row ID. If provided, this component makes sure that the same row is not processed twice by concurrent polls.

Transactional Action

Enumeration, one of:

  • ALWAYS_BEGIN

  • NONE

The type of beginning action that sources can take regarding transactions

NONE

Transaction Type

Enumeration, one of:

  • LOCAL

  • XA

The type of transaction to create. Availability depends on the runtime version.

LOCAL

Primary Node Only

Boolean

Whether this source should be executed only on the primary node when running in a cluster

Scheduling Strategy

scheduling-strategy

Configures the scheduler that triggers the polling

x

Redelivery Policy

Redelivery Policy

Defines a policy for processing the redelivery of the same message

Query Timeout

Number

Indicates the minimum amount of time before the JDBC driver attempts to cancel a running statement. By default, no timeout is used.

0

Query Timeout Unit

Enumeration, one of:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

A time unit that qualifies the #queryTimeout. Values specified in nanoseconds, microseconds, or milliseconds are rounded to seconds.

SECONDS

Fetch Size

Number

Indicates how many rows to fetch from the database when rows are read from a ResultSet.

10

Max Rows

Number

Sets the limit for the maximum number of rows that any ResultSet object generated by this message processor can contain for the given number. If the limit is exceeded, the excess rows are silently dropped.

Reconnection Strategy

A retry strategy in case of connectivity errors.

Output

Type

Object

For Configurations

Types

Pooling Profile

Field Type Description Default Value Required

Max Pool Size

Number

Maximum number of connections a pool maintains at any given time

5

Min Pool Size

Number

Minimum number of connections a pool maintains at any given time

0

Acquire Increment

Number

Determines how many connections at a time to try to acquire when the pool is exhausted

1

Prepared Statement Cache Size

Number

Determines how many statements are cached per pooled connection. Setting this to zero disables statement caching.

5

Max Wait

Number

The amount of time a client trying to obtain a connection waits for it to be acquired when the pool is exhausted. Setting this value to zero (default) means wait indefinitely. This is equivalent to checkoutTimeout and cannot be overridden in additional-properties.

0

Max Wait Unit

Enumeration, one of:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

A #maxWait.

SECONDS

Max Idle Time

Number

Determines how many seconds a connection can remain pooled but unused before being discarded. Setting this value to zero (default) means idle connections never expire.

0

Additional Properties

Object

A map in which keys are the name of a pooling profile configuration property. Does not support the use of expressions. These properties cannot be used to override any of the previously specified properties (like Max Pool Size or Min Pool Size), the main property prevails if an attempt is made to override it. The map’s values contain the actual assignation for each parameter.

Max Statement

Number

Defines the total number PreparedStatements a DataSource will cache. The pool destroys the least-recently-used PreparedStatement when it reaches the specified limit. When set to 0, statement caching is turned off

Test connection on checkout

Boolean

Disables connection testing on checkout to improve performance. If set to true, an operation is performed at every connection checkout to verify that the connection is valid. A better choice is to verify connections periodically using c3p0.idleConnectionTestPeriod. To improve performance, set this property to false.

true

Column Type

Field Type Description Default Value Required

Id

Number

Type identifier used by the JDBC driver

x

Type Name

String

Name of the data type used by the JDBC driver

x

Class Name

String

Indicates which Java class must be used to map the database type

Reconnection

Field Type Description Default Value Required

Fails Deployment

Boolean

When the application is deployed, a connectivity test is performed on all connectors. If set to true, deployment fails if the test doesn’t pass after exhausting the associated reconnection strategy.

Reconnection Strategy

The reconnection strategy to use

Reconnect

Field Type Description Default Value Required

Frequency

Number

How often to reconnect (in milliseconds)

Count

Number

The number of reconnection attempts to make

blocking

Boolean

If set to false, the reconnection strategy runs in a separate, non-blocking thread

true

Reconnect Forever

Field Type Description Default Value Required

Frequency

Number

How often in milliseconds to reconnect

blocking

Boolean

If set to false, the reconnection strategy runs in a separate, non-blocking thread

true

Expiration Policy

Field Type Description Default Value Required

Max Idle Time

Number

A scalar time value for the maximum amount of time a dynamic configuration instance should be allowed to be idle before it’s considered eligible for expiration

Time Unit

Enumeration, one of:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

A time unit that qualifies the maxIdleTime attribute

Redelivery Policy

Field Type Description Default Value Required

Max Redelivery Count

Number

The maximum number of times a message can be redelivered and processed unsuccessfully before triggering a process-failed-message

Use Secure Hash

Boolean

Whether to use a secure hash algorithm to identify a redelivered message.

Message Digest Algorithm

String

The secure hashing algorithm to use. If this is not set, the default is SHA-256.

SHA-256

Id Expression

String

Defines one or more expressions to use to determine when a message has been redelivered. This property can be set only if Use secure hash is set to false.

Object Store

Object Store

The object store where the redelivery counter for each message is stored

Parameter Type

Field Type Description Default Value Required

Key

String

The name of the input parameter

x

Type Classifier

Type Classifier

x

Type Classifier

Field Type Description Default Value Required

Type

Enumeration, one of:

  • BIT

  • TINYINT

  • SMALLINT

  • INTEGER

  • BIGINT

  • FLOAT

  • REAL

  • DOUBLE

  • NUMERIC

  • DECIMAL

  • CHAR

  • VARCHAR

  • LONGVARCHAR

  • DATE

  • TIME

  • TIMESTAMP

  • BINARY

  • VARBINARY

  • LONGVARBINARY

  • NULL

  • OTHER

  • JAVA_OBJECT

  • DISTINCT

  • STRUCT

  • ARRAY

  • BLOB

  • CLOB

  • REF

  • DATALINK

  • BOOLEAN

  • ROWID

  • NCHAR

  • NVARCHAR

  • LONGNVARCHAR

  • NCLOB

  • SQLXML

  • UNKNOWN

Custom Type

String

Statement Result

Field Type Description Default Value Required

Affected Rows

Number

Generated Keys

Object

Repeatable In Memory Iterable

Field Type Description Default Value Required

Initial Buffer Size

Number

The number of instances that are initially allowed to be kept in memory to consume the stream and provide random access to it. If the stream contains more data than can fit into this buffer, then the buffer expands according to the Buffer size increment attribute, with an upper limit of Max in memory size. The default value is 100 instances.

100

Buffer Size Increment

Number

Specifies by how much the buffer size expands if it exceeds its initial size. Setting a value of zero or lower means that the buffer should not expand, in which case a STREAM_MAXIMUM_SIZE_EXCEEDED error is raised when the buffer gets full. The default value is 100 instances.

100

Max Buffer Size

Number

The maximum amount of memory to use. If more than the specified maximum amount of memory is used, then a `STREAM_MAXIMUM_SIZE_EXCEEDE`D error is raised. A value lower than, or equal to, zero means no limit.

Repeatable File Store Iterable

Field Type Description Default Value Required

In Memory Objects

Number

The maximum number of instances to keep in memory. If more than the specified maximum is required, then content starts to buffer on disk.

Repeatable In Memory Stream

Field Type Description Default Value Required

Initial Buffer Size

Number

The number of instances that are initially allowed to be kept in memory to consume the stream and provide random access to it. If the stream contains more data than can fit into this buffer, then the buffer expands according to the Buffer size increment attribute, with an upper limit of Max in memory size

Buffer Size Increment

Number

Specifies by how much the buffer size expands if it exceeds its initial size. Setting a value of zero or lower means that the buffer should not expand, in which case a STREAM_MAXIMUM_SIZE_EXCEEDED error is raised when the buffer gets full

Max Buffer Size

Number

The maximum amount of memory to use. If more than the specified maximum amount of memory is used, then a STREAM_MAXIMUM_SIZE_EXCEEDED error is raised. A value lower than, or equal to, zero means no limit.

Buffer Unit

Enumeration, one of: BYTE KB MB GB

The unit in which all these attributes are expressed

Repeatable File Store Stream

Field Type Description Default Value Required

In Memory Size

Number

Defines the maximum memory that the stream should use to keep data in memory. If more than that is consumed content on the disk is buffered.

Buffer Unit

Enumeration, one of:

  • BYTE

  • KB

  • MB

  • GB

The unit in which Max in memory size is expressed

Output Parameter

Field Type Description Default Value Required

Key

String

The name of the input parameter

x

Type Classifier

Type Classifier

x

See Also

MuleSoft Help Center

Back to top
View on GitHub