String
JMS Connector Reference 1.2 - Mule 4
JMS Connector Version 1.2
Anypoint Connector for JMS (JMS Connector) is a JMS 1.0.2b, 1.1, and 2.0 compliant MuleSoft Extension, used to consume and produce JMS messages. The extension supports all JMS functionality including topics and queues, durable subscribers, acknowledgment modes and local transactions.
Release Notes: JMS Connector Release Notes
Configurations
Default Configuration
Base configuration for JMS Connector
Parameters
Name | Type | Description | Default Value | Required |
---|---|---|---|---|
Name |
String |
The name for this configuration. Connectors reference the configuration with this name. |
x |
|
Encoding |
The default encoding of the Message body to use if the message doesn’t communicate it. |
|||
Content Type |
String |
The default contentType of the Message body to use if the message doesn’t communicate it. |
/ |
|
Send Correlation Id |
Enumeration, one of:
|
Whether to specify a correlationId when publishing messages. This applies both for custom correlation IDs specifies at the operation level and for default correlation IDs taken from the current event. |
AUTO |
|
Expiration Policy |
Configures the minimum amount of time that a dynamic configuration instance can remain idle before the runtime considers it eligible for expiration. This does not mean that the platform expires the instance at the exact moment that it becomes eligible. The runtime purges the instances when it sees fit. |
|||
Ack Mode |
Enumeration, one of:
|
The ConsumerAckMode to use when consuming a Message Can be overridden at the message source level. This attribute has to be IMMEDIATE if the transactionType is LOCAL or MULTI. |
AUTO |
|
Consumer Type |
One of:
|
The ConsumerType to use by default when consuming a Message Can be overridden at the message source level. |
||
Selector |
String |
Default selector to use for filtering when consuming a Message Can be overridden at the message source level. |
||
Max Redelivery |
Number |
NOTE: Do not configure this parameter in the connector, as it has no effect. This must be configured on the broker side. Used to configure the number of redelivers before discarding the message. No redelivery is represented with 0, while -1 means infinite re deliveries accepted. |
0 |
|
Persistent Delivery |
Boolean |
Sets the default value for the Message#getJMSDeliveryMode. If true, the DeliveryMode#PERSISTENT mode will be used, which instructs the JMS provider to take extra care to insure the message is not lost in transit due to a JMS provider failure. |
false |
|
Priority |
Number |
Defines the default Message#getJMSPriority to use when sending messages. |
4 |
|
Time To Live |
Number |
Defines the default time the message is in the broker before it expires and is discarded. |
0 |
|
Time To Live Unit |
Enumeration, one of:
|
A TimeUnit which qualifies the #timeToLive attribute. Defaults to MILLISECONDS. |
MILLISECONDS |
|
Disable Message Id |
Boolean |
Defines the default value to use when producing messages, for disabling the Message#getJMSMessageID generation in the broker. Depending on the provider it may or may not have effect. |
false |
|
Disable Message Timestamp |
Boolean |
Defines the default value to use, when producing messages, for disable Message#getJMSTimestamp generation in the broker. Depending on the provider it may or may not have effect. |
false |
|
Delivery Delay |
Number |
This is used to determine the Message delivery delay time which is calculated by adding the deliveryDelay value specified on the send method to the time the message was sent. Only used in JmsSpecification#JMS_2_0. |
||
Delivery Delay Unit |
Enumeration, one of:
|
A TimeUnit which qualifies the #deliveryDelay attribute. Defaults to MILLISECONDS. |
MILLISECONDS |
|
Jms Type |
String |
A message JMSType identifier supplied by a client when a message is sent. |
Operations
Consume
<jms:consume>
Operation that allows the user to consume a single Message from a given Destination.
Parameters
Name | Type | Description | Default Value | Required |
---|---|---|---|---|
Configuration |
String |
The name of the configuration to use. |
x |
|
Destination |
String |
The name of the Destination from where the Message should be consumed. |
x |
|
Consumer Type |
One of:
|
The type of the MessageConsumer that is required for the given destination, along with any extra configurations that are required based on the destination type. |
||
Ack Mode |
Enumeration, one of:
|
The ConsumerAckMode to configure over the Message and Session. |
||
Selector |
String |
A custom JMS selector for filtering the messages. |
||
Content Type |
String |
The Message’s content type. |
||
Encoding |
String |
The Message’s content encoding. |
||
Maximum Wait |
Number |
Maximum time to wait for a message before timing out. |
10000 |
|
Maximum Wait Unit |
Enumeration, one of:
|
Time unit to use in the maximumWaitTime configurations. |
MILLISECONDS |
|
Transactional Action |
Enumeration, one of:
|
The type of joining action that operations can take regarding transactions. |
JOIN_IF_POSSIBLE |
|
Target Variable |
String |
The name of a variable to store the operation’s output. |
||
Target Value |
String |
An expression to evaluate against the operation’s output and store the expression outcome in the target variable. |
#[payload] |
|
Reconnection Strategy |
A retry strategy in case of connectivity errors. |
Publish
<jms:publish>
Operation that allows the user to send a Message to a JMS Destination.
Parameters
Name | Type | Description | Default Value | Required |
---|---|---|---|---|
Configuration |
String |
The name of the configuration to use. |
x |
|
Destination |
String |
The name of the Destination where the Message should be sent. |
x |
|
Destination Type |
Enumeration, one of:
|
The DestinationType of the destination |
QUEUE |
|
Transactional Action |
Enumeration, one of:
|
Transactional Action for the operation. Indicates if the publish must be executed or not in a transaction. |
JOIN_IF_POSSIBLE |
|
Send Correlation Id |
Enumeration, one of:
|
options on whether to include an outbound correlation ID or not. |
||
Body |
Any |
The body of the Message. |
#[payload] |
|
Jms Type |
String |
The JMSType header of the Message. |
||
Correlation Id |
String |
The JMSCorrelationID header of the Message. |
||
Send Content Type |
Boolean |
True if the body type should be sent as a Message property. |
true |
|
ContentType |
String |
The content type of the body. |
||
Send Encoding |
Boolean |
True if the body outboundEncoding should be sent as a Message property. |
true |
|
Encoding |
String |
The outboundEncoding of the message’s body. |
||
Reply To |
The JMSReplyTo header information of the Destination where this Message should be replied to. |
|||
User Properties |
Object |
The custom user properties that should be set to this Message. |
||
JMSX Properties |
The JMSX properties that should be set to this Message. |
|||
Persistent Delivery |
Boolean |
If true, the Message is sent using the PERSISTENT JMSDeliveryMode. |
||
Priority |
Number |
The default JMSPriority value to use when sending the message. |
||
Time To Live |
Number |
Defines the default time the message is in the broker before it expires and is discarded. |
||
Time To Live Unit |
Enumeration, one of:
|
Time unit to use in the timeToLive configurations. |
||
Disable Message Id |
Boolean |
If true, the Message is flagged to avoid generating its MessageID. |
||
Disable Message Timestamp |
Boolean |
If true, the Message is flagged to avoid generating its sent Timestamp. |
||
Delivery Delay |
Number |
Only used by JMS 2.0. Sets the delivery delay to be applied to postpone the Message delivery. |
||
Delivery Delay Unit |
Enumeration, one of:
|
Time unit to use in the deliveryDelay configurations. |
||
Reconnection Strategy |
A retry strategy in case of connectivity errors. |
Publish Consume
<jms:publish-consume>
Operation that allows the user to send a message to a JMS Destination and waits for a response either to the provided ReplyTo destination or to a temporary Destination created dynamically.
Parameters
Name | Type | Description | Default Value | Required |
---|---|---|---|---|
Configuration |
String |
The name of the configuration to use. |
x |
|
Destination |
String |
The name of the Destination where the Message should be sent. |
x |
|
Send Correlation Id |
Enumeration, one of:
|
Options on whether to include an outbound correlation ID or not. |
||
Body |
Any |
The body of the Message. |
#[payload] |
|
Jms Type |
String |
The JMSType header of the Message. |
||
Correlation Id |
String |
The JMSCorrelationID header of the Message. |
||
Send Content Type |
Boolean |
True if the body type should be sent as a Message property. |
true |
|
ContentType |
String |
The content type of the body. |
||
Send Encoding |
Boolean |
True if the body outboundEncoding should be sent as a Message property. |
true |
|
Encoding |
String |
The outboundEncoding of the message’s body. |
||
Reply To |
The JMSReplyTo header information of the Destination where this Message should be replied to. |
|||
User Properties |
Object |
The custom user properties that should be set to this Message. |
||
JMSX Properties |
The JMSX properties that should be set to this Message. |
|||
Persistent Delivery |
Boolean |
If true, the Message is sent using the PERSISTENT JMSDeliveryMode. |
||
Priority |
Number |
The default JMSPriority value to use when sending the message. |
||
Time To Live |
Number |
Defines the default time the message is in the broker before it expires and is discarded. |
||
Time To Live Unit |
Enumeration, one of:
|
Time unit to use in the timeToLive configurations. |
||
Disable Message Id |
Boolean |
If true, the Message is flagged to avoid generating its MessageID. |
||
Disable Message Timestamp |
Boolean |
If true, the Message is flagged to avoid generating its sent Timestamp. |
||
Delivery Delay |
Number |
Only used by JMS 2.0. Sets the delivery delay to be applied to postpone the Message delivery. |
||
Delivery Delay Unit |
Enumeration, one of:
|
Time unit to use in the deliveryDelay configurations. |
||
Ack Mode |
Enumeration, one of:
|
The Session ACK mode to use when consuming the message. |
||
Maximum Wait |
Number |
Maximum time to wait for a message to arrive before timeout. |
10000 |
|
Maximum Wait Unit |
Enumeration, one of:
|
Time unit to use in the maximumWaitTime configuration. |
MILLISECONDS |
|
Content Type |
String |
The content type of the message body to be consumed. |
||
Encoding |
String |
The encoding of the message body to be consumed. |
||
Target Variable |
String |
The name of a variable to store the operation’s output. |
||
Target Value |
String |
An expression to evaluate against the operation’s output and store the expression outcome in the target variable. |
#[payload] |
|
Reconnection Strategy |
A retry strategy in case of connectivity errors. |
Ack
<jms:ack>
Allows the user to perform an ACK when the AckMode#MANUAL mode is elected while consuming the Message. As per JMS Spec, performing an ACK over a single Message automatically works as an ACK for all the Messages produced in the same JmsSession.
Recover Session
<jms:recover-session>
Allows the user to perform a session recover when the AckMode#MANUAL mode is elected while consuming the Message. As per JMS Spec, performing a session recover automatically redelivers all the consumed messages that had not being acknowledged before this recover.
Sources
Listener
<jms:listener>
JMS Subscriber for Destinations, allows to listen for incoming Messages.
Parameters
Name | Type | Description | Default Value | Required |
---|---|---|---|---|
Configuration |
String |
The name of the configuration to use. |
x |
|
Destination |
String |
The name of the Destination from where the Message should be consumed. |
x |
|
Consumer Type |
One of:
|
The Type of the Consumer that should be used for the provided destination. |
||
Ack Mode |
Enumeration, one of:
|
The Session ACK mode to use when consuming a message. |
||
Selector |
String |
JMS selector to use for filtering incoming messages. |
||
Inbound Content Type |
String |
The content type of the message body. |
||
Inbound Encoding |
String |
The inboundEncoding of the message body. |
||
Number Of Consumers |
Number |
The number of concurrent consumers to use to receive JMS Messages. |
4 |
|
Transactional Action |
Enumeration, one of:
|
The type of beginning action that sources can take regarding transactions. |
NONE |
|
Transaction Type |
Enumeration, one of:
|
The type of transaction to create. Availability depends on the runtime version. |
LOCAL |
|
Primary Node Only |
Boolean |
Whether this source should only be executed on the primary node when running in Cluster. |
true |
|
Redelivery Policy |
Defines a policy for processing the redelivery of the same message. |
|||
Reconnection Strategy |
A retry strategy in case of connectivity errors. |
|||
Body |
Any |
The body of the Message. |
#[payload] |
|
Jms Type |
String |
The JMSType header of the Message. |
||
Correlation Id |
String |
The JMSCorrelationID header of the Message. |
||
Send Content Type |
Boolean |
True if the body type should be sent as a Message property. |
true |
|
ContentType |
String |
The content type of the body. |
||
Send Encoding |
Boolean |
True if the body outboundEncoding should be sent as a Message property. |
true |
|
Encoding |
String |
The outboundEncoding of the message’s body. |
||
Reply To |
The JMSReplyTo header information of the Destination where this Message should be replied to. |
|||
User Properties |
Object |
The custom user properties that should be set to this Message. |
||
JMSX Properties |
The JMSX properties that should be set to this Message. |
|||
Persistent Delivery |
Boolean |
Whether or not the delivery should be done with a persistent configuration. |
||
Priority |
Number |
The default JMSPriority value to use when sending the message. |
||
Time To Live |
Number |
Defines the default time the message is in the broker before it expires and is discarded. |
||
Time To Live Unit |
Enumeration, one of:
|
Time unit to use in the timeToLive configurations. |
||
Disable Message Id |
Boolean |
If true, the Message is flagged to avoid generating its MessageID. |
||
Disable Message Timestamp |
Boolean |
If true, the Message is flagged to avoid generating its sent Timestamp. |
||
Delivery Delay |
Number |
Only used by JMS 2.0. Sets the delivery delay to be applied to postpone the Message delivery. |
||
Delivery Delay Unit |
Enumeration, one of:
|
Time unit to use in the deliveryDelay configurations. |
Types
Expiration Policy
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
Max Idle Time |
Number |
A scalar time value for the maximum amount of time a dynamic configuration instance should be allowed to be idle before it’s considered eligible for expiration. |
||
Time Unit |
Enumeration, one of:
|
A time unit that qualifies the maxIdleTime attribute. |
JMS Attributes
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
Properties |
Container element for all the properties present in a JMS Message. |
x |
||
Headers |
All the possible headers of a JMS Message. |
x |
||
Ack Id |
String |
The session ACK ID required to ACK a the current Message if one is available, or null otherwise. |
JMS Message Properties
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
All |
Object |
x |
||
User Properties |
Object |
x |
||
Jms Properties |
Object |
x |
||
Jmsx Properties |
x |
JMSX Properties
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
Jmsx User ID |
String |
The identity of the user sending the message. |
||
Jmsx App ID |
String |
The identity of the application sending the message. |
||
Jmsx Delivery Count |
Number |
The number of message delivery attempts. |
||
Jmsx Group ID |
String |
The identity of the message group this message is part of. |
||
Jmsx Group Seq |
Number |
The sequence number of this message within the group. |
||
Jmsx Producer TXID |
String |
The transaction identifier of the transaction within which this message was produced. |
||
Jmsx Consumer TXID |
String |
The transaction identifier of the transaction within which this message was consumed. |
||
Jmsx Rcv Timestamp |
Number |
The time JMS delivered the message to the consumer. |
JMS Headers
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
Destination |
||||
Delivery Mode |
Number |
x |
||
Expiration |
Number |
x |
||
Priority |
Number |
x |
||
Message Id |
String |
|||
Timestamp |
Number |
x |
||
Correlation Id |
String |
|||
Reply To |
||||
Type |
String |
|||
Redelivered |
Boolean |
false |
||
Delivery Time |
Number |
JMS Destination
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
Destination |
String |
The name that identifies the destination where to send a reply to a message. |
x |
|
Destination Type |
Enumeration, one of:
|
The type of this destination. |
QUEUE |
Redelivery Policy
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
Max Redelivery Count |
Number |
NOTE: Do not configure this parameter in the connector, as it has no effect. This must be configured on the broker side. The maximum number of times a message can be redelivered and processed unsuccessfully before triggering process-failed-message. |
||
Use Secure Hash |
Boolean |
Whether to use a secure hash algorithm to identify a redelivered message. |
||
Message Digest Algorithm |
String |
The secure hashing algorithm to use. If not set, the default is SHA-256. |
||
Id Expression |
String |
Defines one or more expressions to use to determine when a message has been redelivered. This property may only be set if useSecureHash is false. |
||
Object Store |
Object Store |
The object store where the redelivery counter for each message is going to be stored. |
Reconnect
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
Frequency |
Number |
How often to reconnect (in milliseconds) |
||
Count |
Number |
The number of reconnection attempts to make |
||
blocking |
Boolean |
If false, the reconnection strategy runs in a separate, non-blocking thread |
true |
Reconnect Forever
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
Frequency |
Number |
How often in milliseconds to reconnect |
||
blocking |
Boolean |
If false, the reconnection strategy runs in a separate, non-blocking thread |
true |
Reconnection
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
Fails Deployment |
Boolean |
When the application is deployed, a connectivity test is performed on all connectors. If set to true, deployment fails if the test doesn’t pass after exhausting the associated reconnection strategy. |
||
Reconnection Strategy |
The reconnection strategy to use. |
Active MQ Connection Factory Configuration
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
Broker Url |
String |
The address of the broker to connect. |
|
|
Enable Xa |
Boolean |
ConnectionFactory should support XA. |
false |
|
Initial Redelivery Delay |
Number |
Used to configure the RedeliveryPolicy#getInitialRedeliveryDelay(). |
1000 |
|
Redelivery Delay |
Number |
Used to configure the RedeliveryPolicy#getRedeliveryDelay(). |
1000 |
|
Max Redelivery |
Number |
NOTE: Do not configure this parameter in the connector, as it has no effect. This must be configured on the broker side. Used to configure the RedeliveryPolicy#getMaximumRedeliveries(). 0 means no redelivery. -1 means infinite re deliveries are accepted. |
0 |
|
Trusted Packages |
Array of String |
Allowed packages of classes to send and receive. Starting with versions 5.12.2 and 5.13.0, ActiveMQ requires you to explicitly allow packages that can be exchanged using ObjectMessages. |
||
Trust All Packages |
Boolean |
Indicates if a class from any package can be sent and received. Enabling this parameter is unsafe because a malicious payload can exploit the host system. Starting with versions 5.12.2 and 5.13.0, ActiveMQ requires you to explicitly allow packages that can be exchanged using ObjectMessages. |
false |
Topic Consumer
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
Durable |
Boolean |
Allows an application to receive all the messages published on a topic, including the ones published when there is no consumer associated with it. Requires a subscriptionName to be provided. |
false |
|
Shared |
Boolean |
Only for JMS 2.0: Allows the processing of messages from at topic subscription by multiple threads, connections or JVMs. Requires a subscriptionName to be provided. |
false |
|
No Local |
Boolean |
Specifies that messages published to the topic by its own connection must not be added to the subscription. |
false |
|
Subscription Name |
String |
The name to use for the subscription. |
Default Caching
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
Session Cache Size |
Number |
Number of sessions to cache. |
||
Cache Producers |
Boolean |
MessageProducers |
true |
|
Cache Consumers |
Boolean |
MessageConsumers |
true |
JNDI Connection Factory
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
Connection Factory Jndi Name |
String |
Name of the ConnectionFactory to be discovered using Jndi and used as a delegate of ConnectionFactory. |
x |
|
Lookup Destination |
Enumeration, one of:
|
The Destinations |
NEVER |
|
Name Resolver Provider |
Provider for the JndiNameResolver. |
x |
JNDI Name Resolver Provider
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
Custom JNDI Name Resolver |
||||
Name Resolver Builder |
JNDI Name Resolver Properties
Field | Type | Description | Default Value | Required |
---|---|---|---|---|
Jndi Initial Context Factory |
String |
x |
||
Jndi Provider Url |
String |
|||
Provider Properties |
Object |