salesforce Dreamforce On-Demand
Contact Us 1-800-596-4880
  1. Homepage
  2. X12 EDI Connector (2.7)
  3. X12 EDI Connector Reference

  4. X12 Schema Configuration

All Connectors

X12 EDI Connector 2.7 - Schema and Trading Partner Configuration - Mule 4

Use these additional XML configuration options to:

  • Set your schema location if you are using custom schemas

  • Define your trading partner relationship by setting SELF or PARTNER identification

You can set the types of error conditions that reject receive transaction sets and any writer message separator operations. These general parameters control both Send and Receive document handling.

Set Your Schema Locations

If you’re using one or more custom schemas, locate these under a directory in src/main/resources and refer to the location relative to this directory. For example, if an 850 schema (either overlay or full) is under src/main/resources/mypartner/850.esl, the schema location is /mypartner/850.esl.

You can configure schema locations in the Anypoint Studio XML view. The schema files are loaded when the connector is initialized, so runtime expressions such as flow variables are not supported.

To configure schemas in Anypoint Studio:

  1. Switch to the XML view by clicking Configuration XML

  2. Modify your X12 EDI configuration to include a list of all the schemas for use by adding an <x12:schema> element for each document type:

<x12-edi:config name="X12_EDI__Configuration" identKeys="true" doc:name="X12 EDI: Configuration">
  <x12-edi:schemas>
    <x12:schema value="/x12/005010/850.esl"/>
  </x12-edi:schemas>
</x12-edi:config>

If you don’t include any schemas in the configuration, X12 EDI Connector attempts to load the standard X12 schema definitions provided with the connector. However, in this case you won’t see any metadata to define the structure of the data passed in and out of the connector.

If the schema definition configuration includes a 997 or 999 Functional Acknowledgment schema, then that schema is used to generate Functional Acknowledgments.

To use the Functional Acknowledgment schema type (997 or 999), that schema must match the generate999Acks Parser parameter (false for 997, true for 999).
XML Value (default) Studio Option

formValidation="X12"/"HIPAA_SNIP1"/"HIPAA_SNIP2"

The schema form and validation level can be either X12 or HIPAA. The default is X12.

schemas=list of values

List of schema paths the connector can use. These paths can be either a file system or classpath.

characterEncoding="PLATFORM"/"ASCII"/"ISO8859_1"/"IBM1047"/"UTF8"

The character encoding used for both send and receive messages. The default PLATFORM is the Mule default encoding.

stringCharacterSet="BASIC"/"EXTENDED"/"UNRESTRICTED"

Use a substitution character for invalid characters, or reject them as errors if set to none or enabled for receive messages in the parser options. The default is EXTENDED for string data.

stringSubstitutionChar="?"

Substitution character used to replace invalid characters in string values. The default is none.

versionIdentifierSuffix="XYZ"

Version identifier code suffix for the group (GS). Setting this value affects both Send and Receive message handling. On the Receive side, the GS08 version code must contain X12 schema version (for example, 004010, 005010, and so on) followed by this suffix. Not setting this value means the Receive-only just verifies that the GS version identifier code starts with the configured schema version. On the Send side, the combination of X12 schema version and this suffix comprises the GS08 value.

Self Identification Parameters

Use these parameters to identify your side of the trading partner relationship.

XML Value (default) Studio Option

interchangeIdQualifierSelf="ZZ"

The ID qualifier for Mule in Exchange (known as the ISA segment). Use this value in combination with the Interchange ID value. Both values must be either specified or not specified.

interchangeIdSelf="MULE"

The ID qualifier for Mule runtime engine in Exchange (known as the ISA segment). Use this value in combination with the Interchange ID value. Both values must be either specified or not specified.

groupIdSelf="MULEAPP"

Application code for Mule runtime engine in a group (GS segment).

Partner Identification Parameters

These identify your partner.

XML Value (default) Studio Option

interchangeIdQualifierSelf="ZZ"

The ID qualifier for a partner in Exchange (known as the ISA segment). Use this value in combination with the Interchange ID value. Both values must be either specified or not specified.

interchangeIdSelf="PARTNER"

The ID qualifier for a partner in Exchange (known as the ISA segment). Use this value in combination with the Interchange ID value. Both values must be either specified or not specified.

groupIdSelf="PARTNERAPP"

Application Code for a partner in a group (GS segment)

Parser Parameters for Error Conditions

These control the parser operation and the types of error conditions that reject Receive transaction sets.

XML Value (default) Studio Option

enforceLengthLimits="true"

Enforce the minimum and maximum lengths for receive values.

truncateExceedingMaxLength="false"

Truncate to the maximum lengths for received values.

enforceCharacterSet="true"

Enforce the allowed character set.

enforceValueRepeats="true"

Enforce the repetition count limits for receive values.

allowUnknownSegments="false"

Allow unknown segments in a transaction set.

enforceSegmentOrder="true"

Enforce the segment order in a transaction set.

allowUnusedSegments="false"

Allow segments marked as Unused in a transaction set.

enforceSegmentRepeats="true"

Enforce segment repetition count limits in a transaction set.

requireUniqueInterchanges="true"

Require unique ISA Interchange Control Numbers (such as ISA13). The default behavior records the interchange numbers previously processed and rejects duplicate interchange numbers from the same partner. It is derived from the interchange Sender and Receiver identification. Setting to false enables received interchange processing to continue and relies on the application flow to track the numbers and handle them appropriately.

requireUniqueGroups="false"

Enforce globally unique Group Control Numbers (GS06) for received functional groups. By default, group numbers need to be unique within an interchange. Setting to true requires group numbers to be unique across all interchanges received from the same partner and application. This is derived from the interchange sender and receiver identification combined with the functional group sender and receiver application codes.

requireUniqueTransactionSets="false"

Enforce globally unique Transaction Set Control Numbers (ST02) for received transaction sets. By default, transaction set control numbers need to be unique only within a particular functional group. Setting to true requires transaction set numbers to be unique across all functional groups received from the same partner and application. This is derived from the interchange sender and receiver identification, combined with the functional group sender and receiver application codes.

daysToStore="30"

Minimum number of days to store interchange, group, and transaction set numbers for uniqueness checking.

ackAllSets="false"

Include a separate AK2/AK5 (997) or AK2/IK5 (999) acknowledgment for every Received transaction set. By default (false), transaction sets containing errors are part of the acknowledgment, with all other transaction sets implicitly acknowledged. Changing to true acknowledges each Received transaction set.

generate999Acks="false"

Generate 999 Implementation Acknowledgments instead of 997 Functional Acknowledgments. Setting to false, the 997 Functional Acknowledgment transaction sets are generated for each received interchange. Setting to true generates 999 Implementation Acknowledgments instead. Support for 999 Implementation Acknowledgments does not include CTX segment generation.

reportSegmentErrors="true"

Report segment error details to the sender in the 997`or`999 flag. Setting to true includes the details of any segment errors that are generated in the 997`or`999 flag. Setting to false does not include the details.

includeFASchema="true"

Expect 997 or 999 Functional Acknowledgments and include the 997 or 999 schema. true automatically includes the schema for the 997 or 999 acknowledgment transaction sets within the set of schemas used by X12 EDI connector. Setting to false, means directly specifying the 997 or 999 schema to process as the input. The schemas used for generating 997 or 999 Functional Acknowledgments are hardcoded and cannot be modified.

acknowledgmentSchemaPath=""

Expect the path either from the file system or the classpath. If the path is specified, it overwrites the default acknowledgment path.

enforceConditionalRules="false"

Enforce conditional rules for Receive values.

enforceCodeSetValidationsParse="false"

Enforce code set validations on the Read operation.

Writer Parameters

These control the types of writer operations.

XML Value (default) Studio Option

dataSeparator="*"

Data element separator character. The default uses the configured value for all output messages and can be overridden at the message level.

componentSeparator=">"

Component separator character. The default uses the configured value for all output messages and can be overridden at the message level.

repetitionSeparator="U"

Repetition separator character. The default uses the configured value for all output messages and can be overridden at the message level. U means repetitions are not used

segmentTerminator="~"

Segment terminator character. The default uses the configured value for all output messages and can be overridden at the message level.

lineEnding="NONE"/"LF"/"CRLF"/"CR"

Line ending to add between segments. The default is NONE. You can add line endings between segments to improve message text output readability.

sendUniqueGroupNumbers="false"

Send unique Group Control Numbers. false (default) assigns functional group control numbers sequentially within each interchange and reuses them in different interchanges. true assigns unique group numbers across all interchanges sent to the same partner and application. It is derived from the interchange sender and receiver identification combined with the functional group sender and receiver application codes.

sendUniqueTransactionNumbers="false"

Send unique Transaction Set Control Numbers. false (default) assigns transaction set control numbers sequentially within each functional group and reuses them in different groups. true assigns unique transaction set numbers across all interchanges sent to the same partner and application. It is derived from the interchange sender and receiver identification, combined with the functional group sender and receiver application codes.

implementationConventionReference=""

Implementation convention reference for transactions (ST segment). Setting this value uses the ST Implementation Convention Reference unless overridden in the message parameters.

initialInterchangeNumber="1"

The initial Interchange Control Number used for outgoing messages.

initialGroupNumber="1"

The initial Group Control Number used for outgoing messages.

initialSetNumber="1"

The initial Transaction Set Control Number used for outgoing messages.

ackRequested="false"

Request acknowledgments for sent transactions flag. If true, 997 or 999 acknowledgments are requested for all sent transactions.

defaultUsageIndicator="P"

Default ISA15 interchange usage indicator: I for Information, P for Production Data, T for Test Data.

useSuppliedValues="false"

Use values from supplied data for control segment identifiers (ISA/IEA, GS/GE, ST/SE segments). false generates control numbers when writing.

outputEdiMimeType="APPLICATION_PLAIN"/"APPLICATION_EDIX12"

Output MIME type to be set for the message, either the default application/plain or X12-specific alternative application/edi-x12.

writeEnforceLengthLimits="true"

Enforce minimum and maximum lengths for write values. The default of true throws an exception when an element is too long or too short. false leaves the values as-is.

writeTruncateExceedingMaxLength="false"

Truncate to the maximum lengths for received values.

enforceConditionalRulesOnWriter="false"

Enforce conditional rules for write values.

interchangeNumberKey=""

Interchange number key name for the object store.

enforceCodeSetValidationsWrite="false"

Enforce code set validations on the Write operation.

Write Batch Parameters

These control the types of Write batch (<edifact:write-batch>) operations.

XML Value (default) Studio Option

batchDataSeparator="*"

Data element separator character. The default uses the configured value for all output messages and can be overridden at the message level.

batchComponentSeparator=">"

Component separator character. The default uses the configured value for all output messages and can be overridden at the message level.

batchRepetitionSeparator="U"

Repetition separator character. The default uses the configured value for all output messages and can be overridden at the message level. U means repetitions are not used

batchSegmentTerminator="~"

Segment terminator character. The default uses the configured value for all output messages and can be overridden at the message level.

batchLineEnding="NONE"/"LF"/"CRLF"/"CR"

Line ending to add between segments. The default is NONE. You can add line endings between segments to improve message text output readability.

batchSendUniqueGroupNumbers="false"

Send unique Group Control Numbers. false (default) assigns functional group control numbers sequentially within each interchange and reuses them in different interchanges. true assigns unique group numbers across all interchanges sent to the same partner and application. It is derived from the interchange sender and receiver identification combined with the functional group sender and receiver application codes.

batchSendUniqueTransactionNumbers="false"

Send unique Transaction Set Control Numbers. false (default) assigns transaction set control numbers sequentially within each functional group and reuses them in different groups. true assigns unique transaction set numbers across all interchanges sent to the same partner and application. It is derived from the interchange sender and receiver identification, combined with the functional group sender and receiver application codes.

batchInitialInterchangeNumber="1"

The initial Interchange Control Number used for outgoing messages.

batchInitialGroupNumber="1"

The initial Group Control Number used for outgoing messages.

batchInitialSetNumber="1"

The initial Transaction Set Control Number used for outgoing messages.

batchAckRequested="false"

Request acknowledgments for sent transactions flag. If true, 997 or 999 acknowledgments are requested for all sent transactions.

batchDefaultUsageIndicator="P"

Default ISA15 interchange usage indicator: I for Information, P for Production Data, T for Test Data.

batchOutputEdiMimeType="APPLICATION_PLAIN"/"APPLICATION_EDIX12"

Output MIME type to be set for the message, either the default application/plain or X12-specific alternative application/edi-x12.

batchInterchangeNumberKey=""

Interchange number key name for object store.

batchGroupNumberKey=""

Group number key name for object store.

batchTransactionNumberKey=""

Transaction number key name for object store.

batchEnforceLengthLimits="TRUE"

Enforce minimum and maximum lengths for received values.

batchTruncateExceedingMaxLength="false"

Truncate to the maximum lengths for received values.

enforceCodeSetValidationsBatch="false"

Enforce code set validations on the Write Batch operation.

Next Step

After you complete configuring the connector, you can try the Examples.

See Also

Back to top
View on GitHub