salesforce Dreamforce On-Demand
Contact Us 1-800-596-4880
  1. Homepage
  2. Database Connector (1.11)
  3. Database Connector Examples

  4. Query a Single Record from a Database

All Connectors

Query a Single Record from a Database Example - Mule 4

The Anypoint Connector for Database (Database Connector) Query single operation enables you to execute an SQL query that returns a single record (row) from a database and access the result payload without any additional transformations. This operation does not stream any of the returned fields. When the query is executed, all the values of the returned row are read into memory and returned in the payload.

You must be careful, however, because if your row is too large, you could run out of memory. Also, if you use connection pooling you do not have to worry about your application running out of connections, because this operation returns the connection to the pool immediately after the query is executed.

You invoke the Query single operation in the same way as you invoke the Select operation; however, you always get a single result using the Query single operation, regardless of the number of records returned by the actual SQL query.

The following example shows how to configure the operation in a Mule application that retrieves books information from a table in a MySQL database. To accomplish this example, you must:

  • Run an SQL statement that creates a table called BOOK and inserts seven records of book information (title, author, bookshopName, isbn, price).

  • Configure the SQL database connection.

  • Create the Mule application.

  • Run the application and then test it by using with curl commands.

Query a single record from a database flow
Figure 1. Query a Single Record from a Database flow

Create the Table in the Database

Before configuring the SQL database connection and creating the Mule app, run the following SQL statement to create a table called BOOK and insert seven book records. An incremental id is associated with each new book added into to table. For example, the first book added to the table has an id equal to 1, the second book has an id equal to 2, and so on.

USE SYS;

CREATE TABLE BOOK(
    id MEDIUMINT NOT NULL AUTO_INCREMENT,
    title VARCHAR(100),
    author VARCHAR(100),
    bookshopName VARCHAR(100),
    isbn VARCHAR(13),
    price SMALLINT,
    PRIMARY KEY (id)
);

INSERT INTO BOOK(title, author, bookshopName, isbn, price) VALUES('Good Omens', 'Terry Pratchett and Neil Gaiman', 'A.Z. Fell and Co.', '9780060853983', 50);
INSERT INTO BOOK(title, author, bookshopName, isbn, price) VALUES('A Wizard of Earthsea', 'Ursula K. Le Guin', 'A.Z. Fell and Co.', '9780547773742', 20);
INSERT INTO BOOK(title, author, bookshopName, isbn, price) VALUES('IT', 'Stephen King', 'A.Z. Fell and Co.', '9781508297123', 20);
INSERT INTO BOOK(title, author, bookshopName, isbn, price) VALUES('The Nice and Accurate Prophecies of Agnes Nutter', 'Agnes Nutter', 'A.Z. Fell and Co.', '000000000000', 200);
INSERT INTO BOOK(title, author, bookshopName, isbn, price) VALUES('Cujo', 'Stephen King', 'A.Z. Fell and Co.', '9781501192241', 20);
INSERT INTO BOOK(title, author, bookshopName, isbn, price) VALUES('Nation', 'Terry Pratchett', 'A.Z. Fell and Co.', '9780552557795', 30);
INSERT INTO BOOK(title, author, bookshopName, isbn, price) VALUES('The Ocean at the End of the Lane', 'Neil Gaiman', 'A.Z. Fell and Co.', '9780062459367', 30);

Configure a MySQL Database Connection

After you create the table, go to Anypoint Studio to configure the MySQL database connection:

  1. Create a new Mule project in Studio.

  2. Navigate to the Global Elements view.

  3. Click Create to open the Choose Global Type view.

  4. In the Filter field, type http, select HTTP Listener config, and click OK.
    This configuration is for the HTTP Listener source that initiates the Mule application flow.

  5. In the HTTP Listener config window, complete the following fields:

    • Protocol: HTTP (Default)

    • Host: All Interfaces [0.0.0.0] (default)

    • Port: 8081

  1. Click OK.

  2. In the Global Elements view, click Create to open the Choose Global Type view.

  3. In the Filter field, type database, select Database Config, and click OK.

  4. In the Database Config window, set the Name field to dbConfig.

  5. In the Connection field, select MySQL Connection.

  6. Click Configure to add the required MySQL JDBC driver and select one of:

    • Add recommended library
      Install the recommended library.

    • Use local file
      Install the library using a local file.

    • Add Maven dependency
      Install a Maven dependency to add to the project.

  7. In the Connection section, complete the following fields:

    • Host: localhost

    • Port: 3306

    • User: root

    • Password: mysql

    • Database: sys

  8. On the Advanced tab, set the Pooling profile field to Edit inline.

  9. Set the Max pool size field to 5.

  10. Click Test Connection to confirm that Mule can connect to the database.

  11. Click OK.

The following screenshot shows the HTTP Listener global element configuration:

The HTTP Listener global element configuration
Figure 2. HTTP Listener configuration

The following screenshots show the Database global element configuration:

The database general configuration setting the Host, Port, User, and Password fields.
Figure 3. Database Config General configuration

Create, Configure, Run and Test the Mule Application

After you configure the MySQL database connection, create, configure, run, and test the Mule app:

Create a Flow by Configuring the HTTP Listener and Set Variable Component

To create the Mule flow:

  1. In the Mule Palette view, select the HTTP Listener source and drag it onto the canvas.
    The source initiates the flow by listening for incoming HTTP message attributes.

  2. In the Connector configuration field, select the HTTP_Listener_config global configuration.

  3. Set the Path field to /select/book/{maxId}.
    The maxId value parameter indicates how many books records to retrieve from the database. You can increment this value regardless of the number of maximum connections you configured in your database connection pool.

  4. In the Mime Type tab, set the Mime Type field to application/json.

  5. In the Advanced tab, set the Allowed methods field to GET.

  6. Drag a Set Variable component to the right of the Listener source.
    This component creates a new variable to save the database results that will be obtained from the Query single operation.

  7. Set the Name field to bookCollection and the Value field to #[[]]:

The Set Variable component configuration
Figure 4. Set Variable configuration

Configure the For Each Component, the Query Single Operation, and the Set Payload Component

Continue creating the Mule application using a For Each component to iterate the number of books requested by HTTP Listener. Then retrieve the book information using the Query single operation, and save the results in a payload variable:

  1. Drag a For Each component to the right of Set Variable.

  2. Set the Collection field to #[1 to attributes.uriParams.maxId as Number].
    This expression iterates the collection of books in the table, from the first book (1) to the number of books set in the maxId parameter, when performing the HTTP request /select/book/{maxId}.

    For Each configuration
    Figure 5. For Each configuration

  3. Drag the Query single operation into the For Each component.

  4. Set the Connector configuration field to Database_Config to connect to the MySQL database configuration.

  5. Set the SQL Query Text field to SELECT id, title, author FROM BOOK WHERE id = :id.
    This query selects the books information from the database.

  6. Set the Input Parameters field to ![CDATA[#[{'id': payload }]]].
    This expression maps the key parameter id (referenced in the previous SQL Query Text expression) to payload which is the result value of books information retrieved using the SELECT query.

    Query single configuration
    Figure 6. Query single configuration

  7. Drag another Set Variable component to the right of the Query single operation.

  8. Set the Name field to bookCollection and the Value field to #[vars.bookCollection ++ [payload]].
    The original variable bookCollection now saves the payload of the retrieved book information.

  9. Drag a Set Payload component to the right of the For Each component.

  10. Set the Value field to #[vars.bookCollection] to save the variable content as a new output payload:

Set Payload configuration
Figure 7. Set Payload configuration

Run and Test the Mule Application

To run and test the Mule application:

  1. Save the project in Studio.

  2. Test the app by running curl localhost:8081/select/book/7 at the command line.
    This command selects the first seven books of the table, regardless of the maximum number of connections (5) configured in the pool.

XML for Querying a Single Record from a Database

Paste this code into your Studio XML editor to quickly load the flow for this example into your Mule app:

<?xml version="1.0" encoding="UTF-8"?>

<mule xmlns:db="http://www.mulesoft.org/schema/mule/db"
	xmlns:http="http://www.mulesoft.org/schema/mule/http"
	xmlns="http://www.mulesoft.org/schema/mule/core" xmlns:doc="http://www.mulesoft.org/schema/mule/documentation"
	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
	xsi:schemaLocation="
http://www.mulesoft.org/schema/mule/db http://www.mulesoft.org/schema/mule/db/current/mule-db.xsd
http://www.mulesoft.org/schema/mule/http http://www.mulesoft.org/schema/mule/http/current/mule-http.xsd http://www.mulesoft.org/schema/mule/core http://www.mulesoft.org/schema/mule/core/current/mule.xsd"></mule>
	<http:listener-config name="HTTP_Listener_config" doc:name="HTTP Listener config" doc:id="9501220e-fba8-440b-afdf-14b4ca010fe8" >
		<http:listener-connection host="0.0.0.0" port="8081" />
	</http:listener-config>

	<db:config name="Database_Config" doc:name="Database Config" doc:id="20db2231-3668-48d0-bb60-66f120fc99c8" >
		<db:my-sql-connection host="localhost" port="3306" user="root" password="mysql" database="sys">
			<db:pooling-profile maxPoolSize="5"/>
		</db:my-sql-connection>
	</db:config>

	<flow name="querysingleForeachFlow">
		<http:listener doc:name="Listener" config-ref="HTTP_Listener_config" path="/select/book/{maxId}" outputMimeType="application/json" allowedMethods="GET"/>
		<set-variable variableName="bookCollection" value="#[[]]" />
		<foreach collection="#[1 to attributes.uriParams.maxId as Number]">
			<db:query-single doc:name="Query single" config-ref="Database_Config">
				<db:sql>SELECT id, title, author FROM BOOK WHERE id = :id</db:sql>
				<db:input-parameters><![CDATA[#[{'id': payload }]]]></db:input-parameters>
			</db:query-single>
			<set-variable variableName="bookCollection" value="#[vars.bookCollection ++ [payload]]" />
		</foreach>
		<set-payload value="#[output application/json --- { books : vars.bookCollection }]" />
	</flow>

See Also

Back to top
View on GitHub