Contact Us 1-800-596-4880

TCP Transport Reference

The following Mule transports provide access to TCP connections:

  • The TCP Transport, discussed on this page, which uses the basic TCP transport.

  • The SSL and TLS Transports, which use TCP with socket-level security.

Other than the type of socket used, these transports all behave quite similarly.

The TCP transport allows sending or receiving messages over TCP connections. TCP is a layer over IP and used to implement many other reliable protocols such as HTTP and FTP. However, you may want to use the TCP transport directly if you require a specific protocol for reading the message payload that is not supported by one of these higher level protocols. This is often the case when communicating with legacy or native system applications that don’t support web services.

Transport Info

Feature Value Description

Transport

Multicast

The name/protocol of the transport

Doc

Links to the JavaDoc and SchemaDoc for the transport

Inbound

check

Whether the transport can receive inbound events and can be used for an inbound endpoint.

Outbound

check

Whether the transport can produce outbound events and be used with an outbound endpoint.

Request

check

Whether this endpoint can be queried directly with a request call (via MuleClient or the EventContext)

Transactions

error

Whether transactions are supported by the transport. Transports that support transactions can be configured in either local or distributed two-phase commit (XA) transaction.

Streaming

error

Whether this transport can process messages that come in on an input stream. This allows for very efficient processing of large data. For more information, see Streaming.

Retries

error

Whether this transport supports retry policies. Note that all transports can be configured with Retry policies, but only the ones marked here are officially supported by MuleSoft.

MEPs

one-way, request-response

Message Exchange Patterns supported by this transport.

Default MEP

request-response

The default MEP for endpoints that use this transport that do not explicitly configure a MEP.

Maven Artifact

org.mule.transport:mule-transport-multicast

The group name a artifact name for this transport in Maven.

Namespace and Syntax

XML namespace:

xmlns:tcp="http://www.mulesoft.org/schema/mule/tcp"

XML Schema location:

http://www.mulesoft.org/schema/mule/tcp http://www.mulesoft.org/schema/mule/tcp/current/mule-tcp.xsd

Connector syntax:

<tcp:connector name="tcpConnector" receiveBufferSize="1024" receiveBacklog="50" sendTcpNoDelay="false"
                reuseAddress="true" clientSoTimeout="0" serverSoTimeout="0" socketSoLinger="0"
                keepSendSocketOpen="false" keepAlive="true" dispatcherFactory-ref="dispatcherBean">
    <tcp:PROTOCOL-TYPE/>
</tcp:connector>
<tcp:polling-connector name="tcpConnector" receiveBufferSize="1024" receiveBacklog="50" sendTcpNoDelay="false"
                reuseAddress="true" clientSoTimeout="0" serverSoTimeout="0" socketSoLinger="0"
                keepSendSocketOpen="false" keepAlive="true" timeout="10000" pollingFrequency="30000"
                dispatcherFactory-ref="dispatcherBean">
    <tcp:PROTOCOL-TYPE/>
</tcp:polling-connector>

Protocol Types

PROTOCOL-TYPE defines how messages in Mule are reconstituted from the data packets. The protocol types are:

<tcp:direct-protocol payloadOnly="true" rethrowExceptionOnRead="true"/>

<tcp:eof-protocol payloadOnly="true" rethrowExceptionOnRead="true"/>

<tcp:length-protocol payloadOnly="true" maxMessageLength="1024" rethrowExceptionOnRead="true"/>

<tcp:xml-protocol rethrowExceptionOnRead="true"/>

<tcp:xml-eof-protocol rethrowExceptionOnRead="true"/>

<tcp:streaming-protocol rethrowExceptionOnRead="true"/>

<tcp:safe-protocol payloadOnly="true" maxMessageLength="1024" rethrowExceptionOnRead="true"/>

<tcp:custom-class-loading-protocol classLoader-ref="classLoaderBean" payloadOnly="true" maxMessageLength="1024" rethrowExceptionOnRead="true"/>

<tcp:custom-protocol class="com.mycompany.MyProtocol" rethrowExceptionOnRead="true"/>

If no protocol is specified, safe-protocol is used.

Endpoint Syntax

You can define your endpoints two different ways.

  1. Prefixed endpoint:

    <tcp:inbound-endpoint host="localhost" port="65433"/>
  2. Non-prefixed URI:

    <inbound-endpoint address="tcp://localhost:65433"/>

See the sections below for more information.

Considerations

TCP is one of the standard communication protocols used on the Internet, and supports communication both across the internet and within a local area network. The Mule TCP transport uses native Java socket support, adding no communication overhead to the classes in java.net, while allowing many of the advanced features of TCP programming to be specified in the Mule configuration rather than coded in Java.

Use this transport when communicating using low-level TCP connections. To determine when this is appropriate, you can use the following decision tree:

  • Communicating with an external service that uses low-level unsecured TCP connections? If so, use the TCP protocol.

  • Are you communicating with a flow always located in the same Mule application instance? If so, consider use the VM transport.

  • Is it important that messages be persisted until they can be processed? If so, consider using a persistent transport like JMS or File.

  • Are there advantages to a higher-level protocol built on top of TCP, for instance, the request-response features of HTTP, or the store-and-forward features of Email? If so, use the transport for that protocol instead.

  • Is performance the primary concern and it is not important that messages be delivered in the proper order or that the sender is notified if any are lost? If so, use the lighter-weight UDP transport instead.

  • Should messages be secured? If so, use the SSL transport.

  • If you get this far, TCP is a good candidate.

As shown in the examples below, the TCP transport can be used for:

Features

The TCP module allows a Mule application both to send and receive messages over TCP connections, and to declaratively customize the following features of TCP (with the standard name for each feature, where applicable):

  • The timeout for blocking socket operations. This can be declared separately for client and server operations. (SO_TIMEOUT)

  • How long to keep the socket open to allow pending sends to complete. (SO_LINGER)

  • Whether to send available data immediately rather than buffering it. (TCP_NODELAY)

  • Whether to reuse a socket address immediately (SO_REUSEADDR)

  • Whether to use keep-alive to detect when a remote system is no longer reachable (SO_KEEPALIVE).

  • The size in bytes of the network buffer (SO_SNDBUF).

  • The number of pending connection requests to allow.

  • Whether to close a client socket after sending a message.

Protocol Tables

In addition, since TCP and SSL are stream-oriented and Mule is message-oriented, some application protocol is needed to to define where each message begins and ends within the stream. The table below lists the built-in protocols, describing:

  • The XML tag used to specify them

  • Any XML attributes

  • How it defines a message when reading

  • Any processing it does while writing a message

XML Tag Options Read Write Notes

<tcp:custom-class-loading-protocol>

rethrowExceptionOnRead, payloadOnly, maxMessageLength, classLoader-ref

Expects the message to begin with a 4-byte length (in DataOutput.writeInt() format)

Precedes the message with a 4-byte length (in DataOutput.writeInt() format)

Like the length protocol, but specifies a classloader used to deserialize objects

<tcp:custom-protocol>

rethrowExceptionOnRead, class, ref

varies

varies

Allows user-written protocols, for instance, to match existing TCP services.

<tcp:direct-protocol>

rethrowExceptionOnRead, payloadOnly

All currently available bytes

none

There are no explicit message boundaries.

<tcp:eof-protocol>

rethrowExceptionOnRead, payloadOnly

All bytes sent until the socket is closed

none

<tcp:length-protocol>

rethrowExceptionOnRead, payloadOnly, maxMessageLength

Expects the message to begin with a 4-byte length (in DataOutput.writeInt() format)

Precedes the message with a 4-byte length (in DataOutput.writeInt() format)

<tcp:safe-protocol

rethrowExceptionOnRead, payloadOnly, maxMessageLength Expects the message to begin with the string "You are using SafeProtocol" followed by a 4-byte length (in DataOutput.writeInt() format)

Expects the message to be preceded by the string "You are using SafeProtocol" followed by a 4-byte length (in DataOutput.writeInt() format)

Precedes the message with the string "You are using SafeProtocol" followed by a 4-byte length (in DataOutput.writeInt() format)

Somewhat safer than the length protocol because of the extra check. This is the default if no protocol is specified.

<tcp:streaming-protocol

rethrowExceptionOnRead

All bytes sent until the socket is closed

none

<tcp:xml-protocol>

rethrowExceptionOnRead

A message is an XML document that begins with an XML declaration

none

The XML declaration must occur in all messages

<tcp:xml-eof-protocol>

rethrowExceptionOnRead

A message is an XML document that begins with an XML declaration, or whatever remains at EOF

none

The XML declaration must occur in all messages

Table 1. Protocol Attributes
Name Values Default Value Notes

class

The name of the class that implements the custom protocol

See Extending This Transport for an example of writing a custom protocol

classLoader-ref

A reference to a Spring bean that contains the custom classloader

maxMessageLength

The maximum message length allowed

0 (no maximum )

A message longer than the maximum causes an exception to be thrown.

payloadOnly

true

If true, only the Mule message payload is sent or received. If false, the entire Mule message is sent or received.

Protocols that don’t support this attribute always process payloads

ref

A reference to a Spring bean that implements the custom protocol

rethrowExceptionOnRead

Whether to rethrow exception that occur trying to read from the socket

false

Setting this to "false" avoids logging stack traces when the remote socket is closed unexpectedly

Usage

TCP endpoints can be used in one of three ways:

  • To create a TCP server that accepts incoming connections, declare an inbound tcp endpoint with a tcp:connector. This creates a TCP server socket that will read requests from and optionally write responses to client sockets.

  • To poll from a TCP server, declare an inbound tcp endpoint with a tcp:polling-connector. This creates a TCP client socket that will read requests from and optionally write responses to the server socket.

  • To write to a TCP server, create an outbound endpoint with a tcp:connector. This creates a TCP client socket that will write requests to and optionally read responses from a server socket.

To use TCP endpoints, follow the following steps:

  1. Add the MULE TCP namespace to your configuration:

    • Define the tcp prefix using xmlns:tcp="http://www.mulesoft.org/schema/mule/tcp"

    • Define the schema location with http://www.mulesoft.org/schema/mule/tcp
      http://www.mulesoft.org/schema/mule/tcp/3.8/mule-tcp.xsd

  2. Define one or more connectors for TCP endpoints.

Creating a TCP Server

To act as a server that listens for and accepts TCP connections from clients, create a simple TCP connector that inbound endpoints uses:

<tcp:connector name="tcpConnector"/>

Polling from a TCP Server

To act as a client that repeatedly opens connections to a TCP server and reads data from it, create a polling connector that inbound endpoints uses:

<tcp:polling-connector name="tcpConnector"/>

Sending Messages to a TCP Server

To send messages on a TCP connection, create a simple TCP connector that outbound endpoints uses:

<tcp:connector name="tcpConnector"/>
  1. Configure the features of each connector that was created.

    • Begin by choosing the protocol to be used for each message that is sent or received.

    • For each polling connector, choose how often it polls and how long it waits for the connection to complete.

    • Consider the other connector options as well. For instance, if it is important to detect when the remote system becomes unreachable, set keepAlive to true.

  2. Create TCP endpoints.

    • Messages are received on inbound endpoints.

    • Messages are sent to outbound endpoints.

    • Both kinds of endpoints are identified by a host name and a port.

By default, TCP endpoints use the request-response exchange pattern, but they can be explicitly configured as one-way. The decision should be straightforward:

Message flow Connector type Endpoint type Exchange Pattern

Mule receives messages from clients but sends no response

tcp:connector

inbound

one-way

Mule receives messages from clients and sends response

tcp:connector

inbound

request-response

Mule reads messages from a server but sends no responses

tcp:polling-connector

inbound

request-response

Mule reads messages from a server and sends responses

tcp:polling-connector

inbound

request-response

Mule sends messages to a server but receives no response

tcp:connector

outbound

one-way

Mule sends messages to a server and receives responses

tcp:connector

outbound

request-response

Example Configurations

Standard TCP connector in flow
<tcp:connector name="connector">
    <tcp:eof-protocol payloadOnly="false"/> ❹
</tcp:connector> ❶

<flow name="echo">
    <tcp:inbound-endpoint host="localhost" port="4444" > ❷
    <tcp:outbound-endpoint host="remote" port="5555" /> ❸
</flow>

This shows how to create a TCP server in Mule. The connector at ❶ defines that a server socket will be created that accepts connections from clients. Complete mule messages are read from the connection (direct protocol) will become the payload of a Mule message (since payload only is false). The endpoint at ❷ applies these definitions to create a server at port 4444 on the local host. The messages read from there are then sent to a remote tcp endpoint at ❸.
The flow version uses the eof protocol (❹), so that every byte sent on the connection is part of the same Mule message.

Polling TCP connector in flow
<tcp:polling-connector name="pollingConnector"
             clientSoTimeout="3000" pollingFrequency="1000">
    <tcp:direct-protocol payloadOnly="true" />
</tcp:polling-connector> ❶

<flow name="echo">
    <tcp:inbound-endpoint host="localhost" port="4444" /> ❷
    <vm:outbound-endpoint path="out"  connector-ref="queue" /> ❸
</flow>

This shows how to create a TCP endpoint that repeatedly reads from an TCP server. The connector at ❶ defines that a connection will be attempted every second which will wait up to three seconds to complete. Everything read from the connection (direct protocol) will become the payload of a Mule message (payload only). The endpoint at ❷ applies these definitions to port 4444 on the local host. The messages read from there are then sent to a VM endpoint at ❸.

Polling TCP connector in flow
<tcp:connector name="TCP_length_protocol" validateConnections="true" sendBufferSize="1024" receiveBufferSize="1024" receiveBacklog="10" clientSoTimeout="10000" serverSoTimeout="10000" socketSoLinger="0">
    <tcp:length-protocol payloadOnly="true" />
</tcp:connector>❶

<byte-array-to-string-transformer name="byteToString" doc:name="Byte Array to String" />

<flow name="socketFlow1" doc:name="socketFlow1">
    <tcp:inbound-endpoint host="localhost" exchange-pattern="request-response" port="8888" transformer-refs="byteToString" />❷
    <vm:outbound-endpoint path="out" connector-ref="queue" /> ❸
</flow>

The connector at ❶ defines that a server socket will be created that accepts connections from clients, this is configured with length protocol. The endpoint at ❷ applies these definitions to create a server at port 8888 on the local host. The messages read from there are then sent to a VM endpoint at ❸.

Configuration Options

Table 2. TCP Connector Attributes
Name Description Default

clientSoTimeout

the amount of time (in milliseconds) to wait for data to be available when reading from a TCP server socket

system default

keepAlive

Whether to send keep-alive messages to detect when the remote socket becomes unreachable

false

keepSendSocketOpen

Whether to keep the the socket open after sending a message

false

receiveBacklog

The number of connection attempts that can be outstanding

system default

receiveBufferSize

This is the size of the network buffer used to receive messages. In most cases, there is no need to set this, since the system default will be sufficient

system default

reuseAddress

Whether to reuse a socket address that’s currently in a TIMED_WAIT state. This avoids triggering the error that the socket is unavailable

true

sendBufferSize

The size of the network send buffer

system default

sendTcpNoDelay

Whether to send data as soon as its available, rather than waiting for more to arrive to economize on the number of packets sent

false

socketSoLinger

How long (in milliseconds) to wait for the socket to close so that all pending data is flushed

system default

serverSoTimeout

the amount of time (in milliseconds) to wait for data to be available when reading from a client socket

system default

Table 3. Polling TCP Connector-Specific Attributes
Name Description Default

pollingFrequency

How often (in milliseconds) to connect to the TCP sever

1000 milliseconds

timeout

How long (in milliseconds) to wait for the connection to complete

system default

Configuration Reference

Element Listing

TCP Transport

The TCP transport enables events to be sent and received over TCP sockets.

Connector

Connects Mule to a TCP socket to send or receive data via the network.

Table 4. Attributes of <connector…​>
Name Type Required Default Description

sendBufferSize

integer

no

The size of the buffer (in bytes) used when sending data, set on the socket itself.

receiveBufferSize

integer

no

The size of the buffer (in bytes) used when receiving data, set on the socket itself.

receiveBacklog

integer

no

The maximum queue length for incoming connections.

sendTcpNoDelay

boolean

no

If set, transmitted data is not collected together for greater efficiency but sent immediately.

reuseAddress

boolean

no

If set (the default), SO_REUSEADDRESS is set on server sockets before binding. This helps reduce "address already in use" errors when a socket is re-used.

connectionTimeout

integer

no

2 sec

Number of milliseconds to wait until an outbound connection to a remote server is successfully created.

clientSoTimeout

integer

no

This sets the SO_TIMEOUT value when the socket is used as a client. Reading from the socket will block for up to this long (in milliseconds) before the read fails. A value of 0 (the default) causes the read to wait indefinitely (if no data arrives).

serverSoTimeout

integer

no

This sets the SO_TIMEOUT value when the socket is used as a server. Reading from the socket will block for up to this long (in milliseconds) before the read fails. A value of 0 (the default) causes the read to wait indefinitely (if no data arrives).

socketSoLinger

integer

no

This sets the SO_LINGER value. This is related to how long (in milliseconds) the socket will take to close so that any remaining data is transmitted correctly.

keepSendSocketOpen

boolean

no

If set, the socket is not closed after sending a message. This attribute only applies when sending data over a socket (Client).

keepAlive

boolean

no

Enables SO_KEEPALIVE behavior on open sockets. This automatically checks socket connections that are open but unused for long periods and closes them if the connection becomes unavailable. This is a property on the socket itself and is used by a server socket to control whether connections to the server are kept alive before they are recycled.

socketMaxWait

integer

no

Sets the maximum amount of time (in milliseconds) the socket pool should block waiting for a socket before throwing an exception. When less than or equal to 0 it may block indefinitely (the default).

failOnUnresolvedHost

boolean

no

If set (the default), it will fail during socket creation if the host set on the endpoint cannot be resolved. However, it can be set to false to allow unresolved hosts (this is useful on some circumstances like connecting through a proxy).

dispatcherFactory-ref

string

no

Allows to define a custom message dispatcher factory

Table 5. Child Elements of <connector…​>
Name Cardinality Description

abstract-protocol

0..1

The class name for the protocol handler. This controls how the raw data stream is converted into messages. By default, messages are constructed as data is received, with no correction for multiple packets or fragmentation. Typically, change this value, or use a transport that includes a protocol like HTTP.

Inbound endpoint

The inbound-endpoint element configures the endpoint on which the messages are received.

Table 6. Attributes of <inbound-endpoint…​>
Name Type Required Default Description

host

string

no

The host of the TCP socket.

port

port number

no

The port of the TCP socket.

No Child Elements of <inbound-endpoint…​>

Outbound endpoint

The outbound-endpoint element configures the endpoint where the messages are sent.

Table 7. Attributes of <outbound-endpoint…​>
Name Type Required Default Description

host

string

no

The host of the TCP socket.

port

port number

no

The port of the TCP socket.

No Child Elements of <outbound-endpoint…​>

Endpoint

The endpoint element configures a global TCP endpoint definition.

Table 8. Attributes of <endpoint…​>
Name Type Required Default Description

host

string

no

The host of the TCP socket.

port

port number

no

The port of the TCP socket.

No Child Elements of <endpoint…​>

Polling connector

Connects Mule to a TCP socket to send or receive data via the network.

Table 9. Attributes of <polling-connector…​>
Name Type Required Default Description

sendBufferSize

integer

no

The size of the buffer (in bytes) used when sending data, set on the socket itself.

receiveBufferSize

integer

no

The size of the buffer (in bytes) used when receiving data, set on the socket itself.

receiveBacklog

integer

no

The maximum queue length for incoming connections.

sendTcpNoDelay

boolean

no

If set, transmitted data is not collected together for greater efficiency but sent immediately.

reuseAddress

boolean

no

If set (the default), SO_REUSEADDRESS is set on server sockets before binding. This helps reduce "address already in use" errors when a socket is re-used.

connectionTimeout

integer

no

None

Number of milliseconds to wait until an outbound connection to a remote server is successfully created.

clientSoTimeout

integer

no

This sets the SO_TIMEOUT value when the socket is used as a client. Reading from the socket will block for up to this long (in milliseconds) before the read fails. A value of 0 (the default) causes the read to wait indefinitely (if no data arrives).

serverSoTimeout

integer

no

This sets the SO_TIMEOUT value when the socket is used as a server. Reading from the socket will block for up to this long (in milliseconds) before the read fails. A value of 0 (the default) causes the read to wait indefinitely (if no data arrives).

socketSoLinger

integer

no

This sets the SO_LINGER value. This is related to how long (in milliseconds) the socket will take to close so that any remaining data is transmitted correctly.

keepSendSocketOpen

boolean

no

If set, the socket is not closed after sending a message. This attribute only applies when sending data over a socket (Client).

keepAlive

boolean

no

Enables SO_KEEPALIVE behavior on open sockets. This automatically checks socket connections that are open but unused for long periods and closes them if the connection becomes unavailable. This is a property on the socket itself and is used by a server socket to control whether connections to the server are kept alive before they are recycled.

socketMaxWait

integer

no

Sets the maximum amount of time (in milliseconds) the socket pool should block waiting for a socket before throwing an exception. When less than or equal to 0 it may block indefinitely (the default).

failOnUnresolvedHost

boolean

no

If set (the default), it will fail during socket creation if the host set on the endpoint cannot be resolved. However, it can be set to false to allow unresolved hosts (this is useful on some circumstances like connecting through a proxy).

dispatcherFactory-ref

string

no

Allows to define a custom message dispatcher factory

timeout

long

no

The timeout to wait in milliseconds for data to come from the server

pollingFrequency

long

no

The time in milliseconds to wait between each request to the TCP server.

Table 10. Child Elements of <polling-connector…​>
Name Cardinality Description

abstract-protocol

0..1

The class name for the protocol handler. This controls how the raw data stream is converted into messages. By default, messages are constructed as data is received, with no correction for multiple packets or fragmentation. Typically, change this value, or use a transport that includes a protocol like HTTP.

Streaming Protocol

TCP does not guarantee that data written to a socket is transmitted in a single packet, so if you want to transmit entire Mule messages reliably, you must specify an additional protocol. However, this is not an issue with streaming, so the streaming-protocol element is an alias for the "direct" (null) protocol.

Table 11. Attributes of <streaming-protocol…​>
Name Type Required Default Description

rethrowExceptionOnRead

boolean

no

Rethrow the exception if read fails

No Child Elements of <streaming-protocol…​>

XML Protocol

TCP does not guarantee that data written to a socket is transmitted in a single packet, so if you want to transmit entire Mule messages reliably, you must specify an additional protocol. The xml-protocol element configures the XML protocol, which uses XML syntax to isolate messages from the stream of bytes received, so it will only work with well-formed XML.

Table 12. Attributes of <xml-protocol…​>
Name Type Required Default Description

rethrowExceptionOnRead

boolean

no

Rethrow the exception if read fails

No Child Elements of <xml-protocol…​>

Xml eof protocol

Similar to xml-protocol, the xml-eof-protocol element configures the XML protocol, but it will also use socket closure to terminate a message (even if the XML is not well-formed).

Table 13. Attributes of <xml-eof-protocol…​>
Name Type Required Default Description

rethrowExceptionOnRead

boolean

no

Rethrow the exception if read fails

No Child Elements of <xml-eof-protocol…​>

EOF Protocol

TCP does not guarantee that data written to a socket is transmitted in a single packet, so if you want to transmit entire Mule messages reliably, you must specify an additional protocol. The eof-protocol element configures a protocol that simply accumulates all data until the socket closes and places it in a single message.

Table 14. Attributes of <eof-protocol…​>
Name Type Required Default Description

rethrowExceptionOnRead

boolean

no

Rethrow the exception if read fails

payloadOnly

boolean

yes

Sends only the payload, not the entire Mule message object or its properties. This defaults to true when the protocol is not specified explicitly (when the safe protocol is used).

No Child Elements of <eof-protocol…​>

Direct Protocol

TCP does not guarantee that data written to a socket is transmitted in a single packet. Using the direct-protocol element to configure the "null" protocol does not change the normal TCP behavior, so message fragmentation may occur. For example, a single sent message may be received in several pieces, each as a separate received message. Typically, it is not a good choice for messaging within Mule, but it may be necessary to interface with external TCP-based protocols.

Table 15. Attributes of <direct-protocol…​>
Name Type Required Default Description

rethrowExceptionOnRead

boolean

no

Rethrow the exception if read fails

payloadOnly

boolean

yes

Sends only the payload, not the entire Mule message object or its properties. This defaults to true when the protocol is not specified explicitly (when the safe protocol is used).

No Child Elements of <direct-protocol…​>

Safe Protocol

Similar to length-protocol, safe-protocol also includes a prefix. Verification of the prefix allows mis-matched protocols to be detected and avoids interpreting "random" data as a message length (which may give out-of-memory errors). This is the default protocol in Mule 2.x.

Table 16. Attributes of <safe-protocol…​>
Name Type Required Default Description

rethrowExceptionOnRead

boolean

no

Rethrow the exception if read fails

payloadOnly

boolean

yes

Sends only the payload, not the entire Mule message object or its properties. This defaults to true when the protocol is not specified explicitly (when the safe protocol is used).

maxMessageLength

integer

no

An optional maximum length for the number of bytes in a single message. Messages larger than this will trigger an error in the receiver, but it give an assurance that no out-of-memory error will occur.

No Child Elements of <safe-protocol…​>

Custom Class Loading Protocol

A length protocol that uses a specific class loader to load objects from streams

Table 17. Attributes of <custom-class-loading-protocol…​>
Name Type Required Default Description

rethrowExceptionOnRead

boolean

no

Rethrow the exception if read fails

payloadOnly

boolean

yes

Sends only the payload, not the entire Mule message object or its properties. This defaults to true when the protocol is not specified explicitly (when the safe protocol is used).

maxMessageLength

integer

no

An optional maximum length for the number of bytes in a single message. Messages larger than this will trigger an error in the receiver, but it give an assurance that no out-of-memory error will occur.

classLoader-ref

string

no

Allows Spring beans to be defined for class loading

No Child Elements of <custom-class-loading-protocol…​>

Length Protocol

The length-protocol element configures the length protocol, which precedes each message with the number of bytes sent so that an entire message can be constructed on the received.

Table 18. Attributes of <length-protocol…​>
Name Type Required Default Description

rethrowExceptionOnRead

boolean

no

Rethrow the exception if read fails

payloadOnly

boolean

yes

Sends only the payload, not the entire Mule message object or its properties. This defaults to true when the protocol is not specified explicitly (when the safe protocol is used).

maxMessageLength

integer

no

An optional maximum length for the number of bytes in a single message. Messages larger than this trigger an error in the receiver, but it gives an assurance that no out-of-memory error will occur.

No Child Elements of <length-protocol…​>

Custom Protocol

The custom-protocol element allows you to configure your own protocol implementation.

Table 19. Attributes of <custom-protocol…​>
Name Type Required Default Description

rethrowExceptionOnRead

boolean

no

Rethrow the exception if read fails

class

class name

no

A class that implements the TcpProtocol interface.

ref

name (no spaces)

no

Reference to a spring bean that implements the TcpProtocol interface.

No Child Elements of <custom-protocol…​>

Client Socket Properties

Configuration element for setting client socket properties.

Table 20. Attributes of <client-socket-properties…​>
Name Type Required Default Description

name

string

no

The name of this properties object, so that it can be referenced by config elements.

sendBufferSize

integer

no

The size of the buffer (in bytes) used when sending data, set on the socket itself.

receiveBufferSize

integer

no

The size of the buffer (in bytes) used when receiving data, set on the socket itself.

sendTcpNoDelay

boolean

no

true

If set, transmitted data is not collected together for greater efficiency but sent immediately.

timeout

integer

no

0

This sets the SO_TIMEOUT value on client sockets. Reading from the socket will block for up to this long (in milliseconds) before the read fails. A value of 0 (the default) causes the read to wait indefinitely (if no data arrives).

linger

integer

no

-1

This sets the SO_LINGER value. This is related to how long (in milliseconds) the socket will take to close so that any remaining data is transmitted correctly. A value of -1 (default) disables linger on the socket.

keepAlive

boolean

no

Enables SO_KEEPALIVE behavior on open sockets. This automatically checks socket connections that are open but unused for long periods and closes them if the connection becomes unavailable. This is a property on the socket itself and is used by a server socket to control whether connections to the server are kept alive before they are recycled.

connectionTimeout

integer

no

30000

Number of milliseconds to wait until an outbound connection to a remote server is successfully created.

No Child Elements of <client-socket-properties…​>

Server Socket Properties

Configuration element for setting server socket properties.

Table 21. Attributes of <server-socket-properties…​>
Name Type Required Default Description

name

string

no

The name of this properties object, so that it can be referenced by config elements.

sendBufferSize

integer

no

The size of the buffer (in bytes) used when sending data, set on the socket itself.

receiveBufferSize

integer

no

The size of the buffer (in bytes) used when receiving data, set on the socket itself.

sendTcpNoDelay

boolean

no

true

If set, transmitted data is not collected together for greater efficiency but sent immediately.

timeout

integer

no

0

This sets the SO_TIMEOUT value on client sockets. Reading from the socket will block for up to this long (in milliseconds) before the read fails. A value of 0 (the default) causes the read to wait indefinitely (if no data arrives).

linger

integer

no

-1

This sets the SO_LINGER value. This is related to how long (in milliseconds) the socket will take to close so that any remaining data is transmitted correctly. A value of -1 (default) disables linger on the socket.

keepAlive

boolean

no

Enables SO_KEEPALIVE behavior on open sockets. This automatically checks socket connections that are open but unused for long periods and closes them if the connection becomes unavailable. This is a property on the socket itself and is used by a server socket to control whether connections to the server are kept alive before they are recycled.

reuseAddress

boolean

no

true

If set (the default), SO_REUSEADDRESS is set on server sockets before binding. This helps reduce "address already in use" errors when a socket is re-used.

receiveBacklog

integer

no

The maximum queue length for incoming connections.

serverTimeout

integer

no

0

This sets the SO_TIMEOUT value when the socket is used as a server. This is the timeout that applies to the "accept" operation. A value of 0 (the default) causes the accept to wait indefinitely (if no connection arrives).

No Child Elements of <server-socket-properties…​>

Schema

The schema can be found here.

Javadoc API Reference

The Javadoc for this module can be found here:

TCP

Maven

The TCP Module can be included with the following dependency:

 <dependency>
  <groupId>org.mule.transports</groupId>
  <artifactId>mule-transport-tcp</artifactId>
  <version>3.6.0</version>
</dependency>

Extending This Transport

When using TCP to communicate with an external program, it may be necessary to write a custom Mule protocol. The first step is to get a complete description of how the external program delimits messages within the TCP stream. The next is to implement the protocol as a Java class.

  • All protocols must implement the interface org.mule.transport.tcp.TcpProtocol, which contains three methods:

    • Object read(InputStream is) reads a message from the TCP socket

    • write(OutputStream os, Object data) writes a message to the TCP socket

    • ResponseOutputStream createResponse(Socket socket) creates a stream to which a response can be written.

  • Protocols which process byte-streams rather than serialized Mule messages can inherit much useful infrastructure by subclassing `org.mule.transport.tcp.protocols.AbstractByteProtocol`This class

    • implements createResponse

    • handles converting messages to byte arrays, allowing subclasses to implement only the simpler method writeByteArray(OutputStream os, byte[] data)

    • provides methods safeRead(InputStream is, byte[] buffer) and safeRead(InputStream is, byte[] buffer, int size) that handle the situation where data is not currently available when doing non-blocking reads from the TCP socket

Suppose we want to communicate with a server that has a simple protocol: all messages are terminated by >>>. The protocol class would look like this:

package org.mule.transport.tcp.integration;

import org.mule.transport.tcp.protocols.AbstractByteProtocol;

import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;

public class CustomByteProtocol extends AbstractByteProtocol
{

    /**
     * Create a CustomByteProtocol object.
     */
    public CustomByteProtocol()
    {
        super(false); // This protocol does not support streaming.
    }

    /**
     * Write the message's bytes to the socket,
     * then terminate each message with '>>>'.
     */
    @Override
    protected void writeByteArray(OutputStream os, byte[] data) throws IOException
    {
        super.writeByteArray(os, data);
        os.write('>');
        os.write('>');
        os.write('>');
    }

    /**
     * Read bytes until we see '>>>', which ends the message
     */
    public Object read(InputStream is) throws IOException
    {
        ByteArrayOutputStream baos = new ByteArrayOutputStream();
        int count = 0;
        byte read[] = new byte[1];

        while (true)
        {
            // if no bytes are currently available, safeRead()
            // will wait until some arrive
            if (safeRead(is, read) < 0)
            {
                // We've reached EOF.  Return null, so that our
                // caller will know there are no
                // remaining messages
                return null;
            }
            byte b = read[0];
            if (b == '>')
            {
                count++;
                if (count == 3)
                {
                    return baos.toByteArray();
                }
            }
            else
            {
                for (int i = 0; i < count; i++)
                {
                    baos.write('>');
                }
                count = 0;
                baos.write(b);
            }
        }
    }
}

Notes

TCP and SSL are very low-level transports, so the usual tools for debugging their use, for instance, logging messages as they arrive, might not be sufficient. Once messages are being sent and received successfully, things are largely working. It may be necessary to use software (or hardware) than can track messages at the packet level, particularly when a custom protocol is being used. Alternatively, you can debug by temporarily using the direct protocol on all inbound endpoints, since it accepts (and you can then log) bytes as they are received.